Printing Options
From Opera Wiki
N.B: To access this window, in the 
The Printing Options opened by this button consist of a list of technical sheets that meet the most varied processing requirements.
The operator only needs to select the one to be sent to print and press the 
button.
Contents |
Typology prints
Window diagrams
This printout is used to obtain the window diagram on a full sheet. One printout will be produced for each typology in the job.
3D Window diagrams
If the typology nodes are present, this printout is used to obtain the 3D window diagram on a full sheet. One printout will be produced for each typology in the job.
Multiple diagrams
This printout is used to obtain multiple diagrams on a single sheet. A printout with a maximum of 4 typologies per sheet will be produced.
Typology checks
This printout mainly reproduces the information from General info - type; it is a verification printout of the window/door characteristics.
Lists prints
Job cutting list
This printout shows the non-optimized cutting list of all typologies in the job.
Cutting optimization
This printout shows the optimized cutting list.
Sending these two technical printouts is preceded by the Profile selection for cutting lists window:
The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be removed from the list. The selected profile can be removed with the mouse by selecting the flag associated with each row, or by pressing the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.
The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.
Source profiles
This printout shows the cutting list of the source profiles, used for making wooden profiles.
Arch cut 1:1
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.
In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.
Carts
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.
Job batches
This function allows you to print the list of Job batches and the related typologies of the individual batches.
Machining prints
Machinings
This printout shows the list of machinings for the job profiles.
Workcenter profiles
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machinings that will be carried out.
Workcenter bars
This printout shows the optimized bars processed in the work center.
Clamps position
This is a printout related to the use of Timing + Machinings, where the clamping characteristics of the profiles and the position of the clamps on the work center are shown.
Schedule prints
Window Chart
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.
3D Window chart
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.
Typology list
This printout is very similar to the previous one, but without prices.
Delivery list
This is a printout that describes the typologies without the window chart.
Job prints
Transmittance scheme
Prints the typology diagrams with thermal transmittance.
Bill of Materials
This field allows you to obtain the order printout for the supplier. The contents and operation are the same as those explained for the 
button in the Materials window.
Job panes
This is an order printout for the fillings of the window/door units in the quotation. It describes their dimensional characteristics and quantities.
Doc 
The associated button opens the Document selection window, where the document to be printed can be selected. Matching the selected document proposes a series of choices relating to currency, payment methods, and delivery times. This data will appear in the printed document.
Full diagrams prints
Full diagrams
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.
Diagram and profiles
Practically identical to the previous one, but without the list of accessories to be assembled.
Diagram accessories
Unlike the previous one, this reproduces the typology diagram and the accessories to be assembled.
Only hardware var.
This printout, intended for users of the advanced Timing + Machinings step, is used to indicate to the operator assigned to hardware assembly which elements have been selected by the program according to the dimensions. Only accessories coming from an auto-selection depending on the Lia and Hia variables will be included in this printout.
Structure diagrams prints
Structure diagrams (Available from version 3.6)
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.
Structures nodes and machinings (Available from version 3.6)
In the case of separate structures, this printout shows the drawing of the individual window/door units with the machinings and the notes entered in the Design Sheet.
Sashes (Available from version 3.6)
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the Material lists management.
Custom views
This printout shows the enlarged detail using the Views function of the Design Sheet.
Nodes
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.
Inscale sections (Available from version 3.7)
This printout reproduces all the typologies with the numeric reference of the node. To obtain this printout, it is necessary to create a node archive.
ID codes
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.
Typology cutting list
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.
Diagram accessories, Typology panes, Shutter
These printouts respectively show the list of accessories, panes, and shutters required for the whole job.
Form data prints
Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns Using these fields allows different print modes for the job typology form.
Function buttons
The File:Tastosetupstampe2.png button This button opens the print setup window; for the contents and operation of this window, see the Technical print setup paragraph.
The 
button
This button opens the cutting parameter setup window; for the contents and operation of this window, see the Cutting paragraph.
The 
button
This button opens the module data management window and allows you to modify accessory data.
The 
and 
buttons
Using these buttons opens the Job reports management window and allows you to create a job report folder where it is possible to choose and save the documents that are usually printed.
The following images show an example of creating the folder:
After creating the folder, the new field will appear in the Printing Options window and pressing the 
button will show the selected prints.
