Saw machines

From Opera Wiki

This archive is used to store all the data about the technical feature of the saw machines. These informations is required to output a correct optimized list, the clamping of the profiles, the electronic file export and more.

Content description

• Name: the name of the saw machine
• Desc: saw machine description
• Icon: the saw machine manufacturer logo
• Blade width: the saw machine blade thickness
• Correction value: The possible additional dimension to set out on the pallet to obtain the actual cut dimension. Leave the value at zero if you do not use it.
• Cutting board lifting: This field reports the thickness value of a possible leaning slab upon the cutting board, it indicate the distance amid the profile’s leaning point and the cutting board.
• N° of blades: the number of blades the saw machine work with
• Dimension type: the type of dimension that has to be indicated in the cut print-out for 45° cutting. The type can be External, Internal, Profile core, Saw machine, Gauger.
• Unit of measure: the measuring unit for the accessory
• Checkout: the side for the unloading from the saw machine
• Predefined profile reversal: reversal predefined setting left/right for profiles
• No labels: if enabled, opera will not print labels for the profiles associated with this saw machine
• No cutting list: if enabled, opera will not print the cutting list for the profiles associated with this saw machine

• : opens Saw dictionary window
• : opens Saw timing parameters
• : opens Saw machine clamps
• : opens Map setting
• :opens Saw machine parameters
• : opens Saw machine variables
• : opens Saw machine format parameters