Glazing bead settings

From Opera Wiki

• ”lower Name, upper Name, left Name, right Name”: These boxes show the names of the lower, upper, left and right glazing bead respectively.

For each glazing bead, there is a group of buttons that allow you to assign accessories formulas or reset the cuts.

• File:Keytgl.png: This button is useful when you are used to cut the glazing bead together with the frame it is mounted on. In this case, press this button to get a single cut list for both profiles.

• ”Until”: field to define the measure until which to add the fixed measure.
• ”minimum” : field to define the fixed measure to be added.
• ”Every”: field to define the step of the next additions.
• ”add”: field to define the measurements of the next additions.
• ”Mult. vertical. /Mult. horizontal”: field to define how much to multiply the height of the glazing bead in vertical or horizontal direction.
• ”Glazing bead perimeter”: if enabled, calculate the glazing bead on the perimeter of the frame.

• ”Group of Glazing beads”: field to match a group of Glazing beads.
• ”Color. Glazing beads”: field to match a specific color to the glazing beads.

• ”Formula File:Keyf.png”: the matching key opens the frame Definition formula structure and allows you to assign cutting formulas to the glazing bead.
• ”File:Keymachiningglazingbeads.png”: This button allows you to assign machining to the glazing bead, through the [[Machining Glazing bead Management] panel.
• ”File:Accessoriesglazingbead.png”: This button allows you to assign accessories to the glazing bead, through the Accessories glazing bead frame.