Variables
From Opera Wiki
Revision as of 08:25, 8 April 2020 by Fabrizio.Loddo (Talk | contribs)
Variables
Variables are used to set condition and rules in the software. You can use a variable in an automatic selection, to choose one accessory rather than a different one, to define components of an assembled profile and many others...
Here follows the full set of variables available in the software:
Name | Description | ||
---|---|---|---|
A | - | A1 | Cutting angle (left/bottom) of the profile. Allowed values: 45°/90. |
A2 | Cutting angle (right/top) of the profile. Allowed values: 45°/90. | ||
Alt | Height of the target profile | ||
Ap | Opening side of the structure. Ap=1Verso di apertura della struttura. Allowed values: Ap=1 (left opening) / Ap=2 (right opening. | ||
Av | Dimension of the glass overlap of target profile. | ||
Bin | Rail number (only for sliding structures). Allowed values: the number of the current track of the target profile | ||
Cam | The encumbrance value of the targe profile, as from the profile data. | ||
Comp | Blade compensation quota | ||
Fa | Alternative side. This is used for profiles belonging to multiple structures (i.e mullions/transoms) Allowed values: 0 (structure 1) / (1 structure 2) | ||
H | Typology height. | ||
Ha | Sash height(outer edge - outer edge). | ||
Hav | Roller shutter height. | ||
Hf | Structure height without overlaps. | ||
Hia | Internal sash height. | ||
His | Structure height without overlaps. | ||
Hs | Structure height. | ||
Hsa | Total height of glass space (sash) | ||
Hsp | Height of glass space in the current structure. | ||
Hsr | Lock height. | ||
Ht | Transom height | ||
Ht2 | Transom height (2) | ||
Hta | Height of sash core. | ||
Hts | Height of frame core | ||
L | Typology width. | ||
La | Sash width (outer edge-outer edge). | ||
Lato | Side of the structure of. | ||
Lav | Roller shutter width. | ||
Lf | Internal width of the structure. | ||
Li | Profile lenght (inner) | ||
Lia | Internal Sash width | ||
Lis | Internal Structure width. | ||
Lp | Lenght of profile (outer edge-outer edge). | ||
Ls | External structure width. | ||
Lsa | Sash pane width. | ||
Lsp | Horizontal glass space. | ||
Lt | Profile lenght (for cutting) | ||
Lta | Width of sash core | ||
Lts | Width of frame core | ||
N | Accessory n°. For legacy purposes, cannot be used on standard version | ||
Na | Number of sashes in the current structure | ||
Nst | Number of shutter blades in the current structure. | ||
OCam | Overall encumbrance of the two side-by-side frames | ||
Ost | Blades offset | ||
Pa | Total weight of the sash. | ||
Pav | Total weight of the roller shutter | ||
Pm | Mullion position. | ||
Pos | Position of the accessory on the profile. Allowed values: 0 (center)/ 1 (LHS) / 2 (RHS) | ||
Posp | Profile position | ||
Pt | Total weight of the frame. | ||
Pv | Total weight of the frame. | ||
Pz | Number of parts. | ||
Qt | Computed dimension.
For legacy purposes, cannot be used on standard version | ||
Qtpg | Total surface. | ||
Quad | Glass total surface. | ||
Rdo | Panel leftover. This is the trimming dimension of the last panel. | ||
Rif | Reference. | ||
Rst | Shutter blades leftover. This is the remaining empty space after applying the shutter blades over the structure. It's generally used to choose the right end shutter blade | ||
Sav | Shutter surface. | ||
Spes | The thickness of the target profile | ||
Spr | Glass thickness. | ||
Sr | Shifting of the hardware contact. | ||
TA1 | Left profile angle. | ||
TA2 | Right profile angle. | ||
Te | Structure type. Allowed values: 1..15 depending on the structure index in worksheet(Fixed=1; Tilt&Turn=4; …… Shutter box=15) | ||
Tfs | Shape type Allowed values:0 (straight)/ 1 (slanted) / 2= (arch). | ||
Tpt | Frame position type | ||
Tub | Core overhang |
Symbols
Name | Description |
---|---|
+ | Sum |
- | Subtraction |
* | Multiplication |
/ | Division |
> | Greater than |
< | Less than |
>= | Greater than or equal to |
<= | Less than or equal to |
= | Equal to |
<> opp. != | Not equal |
& | AND logical |
| | OR logical |