| Name
| Description
| Values / Notes
|
| A
| Sash to which the accessory profile is assigned.
| A=0 (frame), A=1 (first sash from the left), A=2 (second sash), ...
|
| A1
| Cutting angle (left/bottom) of the profile.
| 45° / 90°
|
| A1C
|
|
|
| A1Pef
|
|
|
| A2
| Cutting angle (right/top) of the profile.
| 45° / 90°
|
| A2C
|
|
|
| A2Pef
|
|
|
| A3Pef
|
|
|
| A4Pef
|
|
|
| Aa
|
|
|
| Alt
| Height of the target profile.
|
|
| Ap
| Opening side of the structure.
| Ap=1 (left opening), Ap=2 (right opening)
|
| Av
| Dimension of the glass overlap of the target profile.
|
|
| Bat
|
|
|
| Bin
| Rail number (only for sliding structures).
| Current track number of the target profile
|
| Cam
| Encumbrance value of the target profile, as defined in the profile data.
|
|
| Comp
| Blade compensation quota.
|
|
| Cr
|
|
|
| Ehd
|
|
|
| f2c
|
|
|
| Fa
| Alternative side. Used for profiles belonging to multiple structures (e.g. mullions/transoms).
| 0 (structure 1), 1 (structure 2)
|
| Fai
|
|
|
| Faic
|
|
|
| Fais
|
|
|
| fep1
|
|
|
| fep2
|
|
|
| Fiax
|
|
|
| Fid
|
|
|
| fin
|
|
|
| finE
|
|
|
| finI
|
|
|
| Frec
|
|
|
| Fsrm
|
|
|
| Gf
|
|
|
| H
| Typology height.
|
|
| Ha
| Sash height (outer edge–outer edge).
|
|
| Hav
| Roller shutter height.
|
|
| Hc#
|
| 1 to 9
|
| Hcn
|
|
|
| Hctinf
|
|
|
| Hctsup
|
|
|
| Hf
| Structure height without overlaps.
|
|
| Hff
|
|
|
| Hg
|
|
|
| Hga
|
|
|
| Hgs
|
|
|
| Hgv
|
|
|
| Hia
| Internal sash height.
|
|
| Hiaq
|
|
|
| His
| Structure height without overlaps.
|
|
| Hs
| Structure height.
|
|
| Hsa
| Total height of the glass space (sash).
|
|
| Hsp
| Height of the glass space in the current structure.
|
|
| Hsr
| Lock height.
|
|
| Hsr#
| Lock height.
| 1 to 30
|
| HsrC
|
|
|
| HsrL
|
|
|
| Ht
| Transom height.
|
|
| Ht2
| Transom height (2).
|
|
| Ht3
| Transom height (3).
|
|
| Hta
| Height of sash core.
|
|
| Hts
| Height of frame core.
|
|
| I#
|
| 1 to 4
|
| Iaa
|
|
|
| ILato
|
|
|
| Ip
|
|
|
| Ita
|
|
|
| Ita#
|
| 1 to 4
|
| L
| Typology width.
|
|
| La
| Sash width (outer edge–outer edge).
|
|
| Lato
| Side of the structure.
|
|
| Lav
| Roller shutter width.
|
|
| Layer
|
|
|
| Lf
| Internal width of the structure.
|
|
| Lff
|
|
|
| Lh
|
|
|
| Lhs
|
|
|
| Li
| Profile length (inner).
|
|
| Lia
| Internal sash width.
|
|
| Liaq
|
|
|
| Lis
| Internal structure width.
|
|
| Lp
| Profile length (outer edge–outer edge).
|
|
| Ls
| External structure width.
|
|
| Lsa
| Sash pane width.
|
|
| Lsp
| Horizontal glass space.
|
|
| Lt
| Profile length (for cutting).
|
|
| Lta
| Width of sash core.
|
|
| Lts
| Width of frame core.
|
|
| Milb
|
|
|
| Mill
|
|
|
| N
| Accessory number.
| Legacy only. Not available in the standard version.
|
| Na
| Number of sashes in the current structure.
|
|
| Nsp
|
|
|
| Nst
| Number of shutter blades in the current structure.
|
|
| OCam
| Overall encumbrance of the two side-by-side frames.
|
|
| OEhd1
|
|
|
| OEhd2
|
|
|
| Ost
| Blades offset.
|
|
| Pa
| Total weight of the sash.
|
|
| Pav
| Total weight of the roller shutter.
|
|
| Pef
|
|
|
| Pm
| Mullion position.
|
|
| Pm2
|
|
|
| Pm3
|
|
|
| Pos
| Position of the accessory on the profile.
| 0 (center), 1 (LHS), 2 (RHS)
|
| Posp
| Profile position.
|
|
| Pst
|
|
|
| Pt
| Total weight of the frame.
|
|
| Pv
| Total weight of the frame.
|
|
| Pz
| Number of parts.
|
|
| Qif
|
|
|
| Qis
|
|
|
| Qt
| Computed dimension.
| Legacy only. Not available in the standard version.
|
| Qtpg
| Total surface.
|
|
| Quad
| Total glass surface.
|
|
| Rdo
| Panel leftover.
| Trimming dimension of the last panel.
|
| Rif
| Reference.
|
|
| Rst
| Shutter blades leftover.
| Remaining empty space after applying the shutter blades; typically used to select the correct end blade.
|
| Sag
|
|
|
| Sav
| Shutter surface.
|
|
| Spes
| Thickness of the target profile.
|
|
| Spes2
|
|
|
| Spr
| Glass thickness.
|
|
| Spv
|
|
|
| Sr
| Shifting of the hardware contact.
|
|
| TA1
| Left profile angle.
|
|
| TA2
| Right profile angle.
|
|
| TAp
|
|
|
| Tar
|
|
|
| Te
| Structure type.
| 1–15 depending on the structure index in the worksheet (e.g. Fixed=1, Tilt&Turn=4, …, Shutter box=15)
|
| TeP
|
|
|
| Tfs
| Shape type.
| 0 (straight), 1 (slanted), 2 (arch)
|
| Tmti
|
|
|
| TPer
|
|
|
| Tpro
|
|
|
| Tpt
| Frame position type.
|
|
| Tub
| Core overhang.
|
|
| Turn
|
|
|
| Ves
|
|
|
| Vr
|
|
|
| x0tpg
|
|
|
| y0tpg
|
|
|
