Saw machines
From Opera Wiki
Revision as of 14:24, 21 June 2011 by Fabrizio.Loddo (Talk | contribs)
This archive is used to store all the data about the technical feature of the saw machines. These informations is required to output a correct optimized list, the clamping of the profiles, the electronic file export and more.
Content description
- Name: the name of the saw machine
- Desc: saw machine description
- Icon: the saw machine manufacturer logo
- Blade width: the saw machine blade thickness
- Correction value: The possible additional dimension to set out on the pallet to obtain the actual cut dimension. Leave the value at zero if you do not use it.
- Cutting board lifting: This field reports the thickness value of a possible leaning slab upon the cutting board, it indicate the distance amid the profile’s leaning point and the cutting board.
- N° of blades: the number of blades the saw machine work with
- Dimension type: the type of dimension that has to be indicated in the cut print-out for 45° cutting. The type can be External, Internal, Profile core, Saw machine, Gauger.
- Unit of measure: the measuring unit for the accessory
- Checkout: the side for the unloading from the saw machine
- Predefined profile reversal: reversal predefined setting left/right for profiles
- No labels: if enabled, opera will not print labels for the profiles associated with this saw machine
- No cutting list: if enabled, opera will not print the cutting list for the profiles associated with this saw machine
- : opens saw dictionary window
- : opens Saw timing parameters
- :
- :
- :
- :
- :