Saw machines

From Opera Wiki

Revision as of 14:23, 21 June 2011 by Fabrizio.Loddo (Talk | contribs)
Jump to: navigation, search



Image:iconawip.png work in progress



This archive is used to store all the data about the technical feature of the saw machines. These informations is required to output a correct optimized list, the clamping of the profiles, the electronic file export and more.

Content description

  • Name: the name of the saw machine
  • Desc: saw machine description
  • Icon: the saw machine manufacturer logo
  • Blade width: the saw machine blade thickness
  • Correction value: The possible additional dimension to set out on the pallet to obtain the actual cut dimension. Leave the value at zero if you do not use it.
  • Cutting board lifting: This field reports the thickness value of a possible leaning slab upon the cutting board, it indicate the distance amid the profile’s leaning point and the cutting board.
  • N° of blades: the number of blades the saw machine work with
  • Dimension type: the type of dimension that has to be indicated in the cut print-out for 45° cutting. The type can be External, Internal, Profile core, Saw machine, Gauger.
  • Unit of measure: the measuring unit for the accessory
  • Checkout: the side for the unloading from the saw machine
  • Predefined profile reversal: reversal predefined setting left/right for profiles
  • No labels: if enabled, opera will not print labels for the profiles associated with this saw machine
  • No cutting list: if enabled, opera will not print the cutting list for the profiles associated with this saw machine
  • image:tastodizionario.png:
  • image:tastotiming2.png:
  • image:tastovariabili.png:
  • image:tastomorse.png:
  • image:tastomapping.png:
  • image:tastoparametri2.png:
  • image:tastoformato.png:
Personal tools