Printing Options

From Opera Wiki

(Difference between revisions)
Jump to: navigation, search
(→The Job report)
Line 1: Line 1:
[[File:quadroopzionidistampa.png|500 px|thumb|right|The Printing Options window]]
[[File:quadroopzionidistampa.png|500 px|thumb|right|The Printing Options window]]
-
{{NB|To access this window, in the [[Job_Management|Job management]] window, select the [[File:tastoschede.png]] button.}}
+
{{NB|To access this window, in the [[Job management]] window, select the [[File:tastoschede.png]] button.}}
 +
 
 +
The '''Printing Options''' opened by this button consist of a list of technical, commercial, and operational printouts that meet the different processing and job management requirements.
 +
 
 +
The operator only needs to select the desired printout and press the '''Print''' button.
-
The Printing Options opened by this button consist of a list of technical sheets that meet the most varied processing requirements.
 
-
The operator only needs to select the one to be sent to print and press the [[File:tastook.png]] button.
 
{{BR}}
{{BR}}
== The Job report ==
== The Job report ==
-
The [[File:+.png]] and [[File:modifica.png]] buttons
+
The [[File:+.png]] and [[File:modifica.png]] buttons open the [[Job reports management]] window and allow you to create or modify a job report, where it is possible to choose and save the documents that are usually printed.
-
Using these buttons opens the [[Job reports management]] window and allows you to create a job report folder where it is possible to choose and save the documents that are usually printed.
+
 
-
The following images show an example of creating the folder:
+
The following images show an example of report creation:
-
[[File:fascicolo.png|thumb|left|400 px]][[File:fascicolo2.png|thumb|center|400 px]]
+
 
-
After creating the folder, the new field will appear in the Printing Options window and pressing the [[File:ok.png]] button will show the selected prints.
+
[[File:fascicolo3.png|thumb|left|400 px]][[File:fascicolo4.png|thumb|center|400 px]]
-
{[BR}}
+
 
 +
After creating the report, in the '''Printing Options''' window it will be possible to select it from the '''Job report''' field. Pressing the '''Print''' button will show the selected printouts.
 +
 
 +
{{BR}}
== Typology prints==
== Typology prints==
 +
[[File:schemitipologie.png|200 px|thumb|Window diagrams]]
[[File:schemitipologie.png|200 px|thumb|Window diagrams]]
'''Window diagrams'''<br>
'''Window diagrams'''<br>
-
This printout is used to obtain the window diagram on a full sheet. One printout will be produced for each typology in the job.
+
This printout is used to obtain the typology diagram on a full sheet. One printout will be produced for each typology in the job.
 +
 
{{BR}}
{{BR}}
 +
[[File:schemitipologie3D.png|200 px|thumb|3D Window diagrams]]
[[File:schemitipologie3D.png|200 px|thumb|3D Window diagrams]]
'''3D Window diagrams'''<br>
'''3D Window diagrams'''<br>
-
If the typology nodes are present, this printout is used to obtain the 3D window diagram on a full sheet. One printout will be produced for each typology in the job.
+
If the typology nodes are present, this printout is used to obtain the 3D typology diagram on a full sheet. One printout will be produced for each typology in the job.
 +
 
{{BR}}
{{BR}}
 +
[[File:schemimultipli.png|200 px|thumb|Multiple diagrams]]
[[File:schemimultipli.png|200 px|thumb|Multiple diagrams]]
'''Multiple diagrams'''<br>
'''Multiple diagrams'''<br>
-
This printout is used to obtain multiple diagrams on a single sheet. A printout with a maximum of 4 typologies per sheet will be produced.
+
This printout is used to obtain multiple diagrams on a single sheet. A printout with multiple typologies per sheet will be produced.
 +
 
{{BR}}
{{BR}}
 +
[[File:schemaverificatipologie.png|200 px|thumb|Typology checks]]
[[File:schemaverificatipologie.png|200 px|thumb|Typology checks]]
'''Typology checks'''<br>
'''Typology checks'''<br>
-
This printout mainly reproduces the information from General info - type; it is a verification printout of the window/door characteristics.
+
This printout mainly reproduces the information from [[General info - type|General info - type]] and is a verification printout of the window/door characteristics.
 +
 
{{BR}}
{{BR}}
-
== Lists prints==
+
== List prints==
 +
 
[[File:distintaditaglio.png|200 px|thumb|Job cutting list]]
[[File:distintaditaglio.png|200 px|thumb|Job cutting list]]
'''Job cutting list'''<br>
'''Job cutting list'''<br>
This printout shows the non-optimized cutting list of all typologies in the job.
This printout shows the non-optimized cutting list of all typologies in the job.
 +
{{BR}}
{{BR}}
 +
[[File:ottimizzazioneditaglio.png|200 px|thumb|Cutting optimization]]
[[File:ottimizzazioneditaglio.png|200 px|thumb|Cutting optimization]]
'''Cutting optimization'''<br>
'''Cutting optimization'''<br>
This printout shows the optimized cutting list.
This printout shows the optimized cutting list.
 +
{{BR}}
{{BR}}
-
Sending these two technical printouts is preceded by the Profile selection for cutting lists window:
+
Sending the '''Job cutting list''' and '''Cutting optimization''' printouts is preceded by the '''Profile selection for cutting lists''' window:
 +
 
[[File:selezioneprofilidistintataglio.png|400 px|thumb|left|Profile selection for cutting list]] [[File:selezioneprofiliottimizzaionetaglio.png|500 px|thumb|center|Profile selection for cutting optimization]]  
[[File:selezioneprofilidistintataglio.png|400 px|thumb|left|Profile selection for cutting list]] [[File:selezioneprofiliottimizzaionetaglio.png|500 px|thumb|center|Profile selection for cutting optimization]]  
 +
{{BR}}
{{BR}}
-
The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be removed from the list. The selected profile can be removed with the mouse by selecting the flag associated with each row, or by pressing the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.
+
 
 +
The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be excluded from the list.
 +
 
 +
The selected profile can be excluded through the flag associated with each row, also by using the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.
 +
 
The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.
The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.
{{BR}}
{{BR}}
 +
 +
'''Profile composition'''<br>
 +
This printout shows the composition of the profiles used in the job.
 +
 +
{{BR}}
 +
 +
'''Pick up list'''<br>
 +
This printout allows you to obtain the list of profiles or materials to be picked up for processing.
 +
 +
{{BR}}
 +
[[File:Profilisorgente.png|200 px|thumb|Source profiles]]
[[File:Profilisorgente.png|200 px|thumb|Source profiles]]
'''Source profiles'''<br>
'''Source profiles'''<br>
-
This printout shows the cutting list of the source profiles, used for making wooden profiles.
+
This printout shows the cutting list of the source profiles, used for making wooden profiles or compound profiles.
 +
 
{{BR}}
{{BR}}
 +
 +
'''2D optimization'''<br>
 +
This printout allows you to obtain the two-dimensional optimization of materials managed with 2D logic.
 +
 +
{{BR}}
 +
[[File:tagliarco.png|200 px|thumb|Arch cut 1:1]]
[[File:tagliarco.png|200 px|thumb|Arch cut 1:1]]
'''Arch cut 1:1'''<br>
'''Arch cut 1:1'''<br>
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.
 +
In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.
In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.
 +
{{BR}}
{{BR}}
 +
[[File:stampacarrelli.png|200 px|thumb|Carts]]
[[File:stampacarrelli.png|200 px|thumb|Carts]]
'''Carts'''<br>
'''Carts'''<br>
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.
 +
{{BR}}
{{BR}}
 +
[[File:stampafasicommessa.png|200 px|thumb|Job batches]]
[[File:stampafasicommessa.png|200 px|thumb|Job batches]]
'''Job batches'''<br>
'''Job batches'''<br>
This function allows you to print the list of ''Job batches'' and the related typologies of the individual batches.
This function allows you to print the list of ''Job batches'' and the related typologies of the individual batches.
 +
 +
{{BR}}
== Machining prints ==
== Machining prints ==
 +
[[File:stampaLavorazioni.png|200 px|thumb|Machinings]]
'''Machinings'''<br>
'''Machinings'''<br>
-
This printout shows the list of machinings for the job profiles.
+
This printout shows the list of machining operations for the job profiles.
 +
{{BR}}
 +
 +
[[File:stampaprofilicentrodilavoro.png|200 px|thumb|Workcenter profiles]]
'''Workcenter profiles'''<br>
'''Workcenter profiles'''<br>
-
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machinings that will be carried out.
+
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machining operations that will be carried out.
 +
 
 +
{{BR}}
'''Workcenter bars'''<br>
'''Workcenter bars'''<br>
This printout shows the optimized bars processed in the work center.
This printout shows the optimized bars processed in the work center.
-
'''Clamps position'''<br>
+
{{BR}}
-
This is a printout related to the use of Timing + Machinings, where the clamping characteristics of the profiles and the position of the clamps on the work center are shown.
+
-
== Schedule prints==
+
Selecting the last two printouts activates the following fields, which may appear greyed out in the window when they are not available:
-
+
 
 +
* '''Clamps position'''<br>
 +
This is a printout showing the position of the clamps on the work center.
 +
 
 +
* '''Print machining location'''<br>
 +
This is a printout showing the position of the machining operations on the profile.
 +
 
 +
* '''Prints front clamp'''<br>
 +
This is a clamping printout in which the clamped piece is shown from the front.
 +
 
 +
{{BR}}
 +
 
 +
== Window Chart prints==
 +
 
 +
[[File:stampaabaco.png|200 px|thumb|Window Chart]]
'''Window Chart'''<br>
'''Window Chart'''<br>
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.
 +
 +
{{BR}}
'''3D Window chart'''<br>
'''3D Window chart'''<br>
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.
 +
 +
{{BR}}
 +
 +
This section is activated with the Window Chart and 3D Window chart printouts:
 +
 +
**'''Window chart data'''<br>
 +
If selected, it activates the [[File:Tastoabacotip.png]] button to open the [[Window chart print setup]] window, which allows you to modify the document.
 +
 +
**'''Currency''' [[File:tastoc.png]]<br>
 +
Allows you to select the currency to be used in printouts that contain economic values.
 +
 +
{{BR}}
'''Typology list'''<br>
'''Typology list'''<br>
-
This printout is very similar to the previous one, but without prices.
+
This printout is very similar to the previous Window Chart printout, but without prices, and activates the Window chart data field.
 +
{{BR}}
 +
 +
== Job prints ==
 +
 +
[[File:stampaelencotipologie.png|200 px|thumb|Delivery list]]
'''Delivery list'''<br>
'''Delivery list'''<br>
This is a printout that describes the typologies without the window chart.
This is a printout that describes the typologies without the window chart.
 +
{{BR}}
-
== Job prints ==
+
'''Structures list'''<br>
 +
This printout shows the list of structures present in the job.
 +
 
 +
{{BR}}
 +
 
 +
'''Trimmings'''<br>
 +
This printout shows the data relating to the trimmings provided in the job.
 +
 
 +
{{BR}}
'''Transmittance scheme'''<br>
'''Transmittance scheme'''<br>
Prints the typology diagrams with thermal transmittance.
Prints the typology diagrams with thermal transmittance.
 +
 +
{{BR}}
'''Bill of Materials'''<br>
'''Bill of Materials'''<br>
-
This field allows you to obtain the order printout for the supplier. The contents and operation are the same as those explained for the [[File:tastodistinta.png]] button in the Materials window.
+
This field allows you to obtain the job bill of materials printout. The contents and operation are the same as those explained for the [[File:tastodistinta.png]] button in the Materials window.
 +
 
 +
{{BR}}
   
   
'''Job panes'''<br>
'''Job panes'''<br>
-
This is an order printout for the fillings of the window/door units in the quotation. It describes their dimensional characteristics and quantities.
+
This is an order printout for the panes of the window/door units in the quotation. It describes their dimensional characteristics and quantities.
 +
 
 +
{{BR}}
 +
 
 +
'''Delivering list'''<br>
 +
This printout allows you to obtain the list of elements or materials provided for delivery.
 +
 
 +
{{BR}}
'''Doc''' [[File:tastoc.png]]<br>  
'''Doc''' [[File:tastoc.png]]<br>  
-
The associated button opens the Document selection window, where the document to be printed can be selected. Matching the selected document proposes a series of choices relating to currency, payment methods, and delivery times. This data will appear in the printed document.
+
The associated button opens the document selection window, where it is possible to choose which document to print.
 +
 
 +
{{BR}}
 +
 
 +
'''Report''' [[File:tastoc.png]]<br>
 +
The associated button allows you to select a report linked to the printout.  
 +
 
 +
{{BR}}
== Full diagrams prints==
== Full diagrams prints==
 +
[[File:stampaschemicompleti.png|200 px|thumb|Full diagrams]]
'''Full diagrams'''<br>
'''Full diagrams'''<br>
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.
 +
 +
{{BR}}
'''Diagram and profiles'''<br>
'''Diagram and profiles'''<br>
Practically identical to the previous one, but without the list of accessories to be assembled.
Practically identical to the previous one, but without the list of accessories to be assembled.
 +
 +
{{BR}}
'''Diagram accessories'''<br>
'''Diagram accessories'''<br>
-
Unlike the previous one, this reproduces the typology diagram and the accessories to be assembled.
+
Unlike the previous one, this printout reproduces the typology diagram and the accessories to be assembled.
 +
 
 +
{{BR}}
'''Only hardware var.'''<br>
'''Only hardware var.'''<br>
-
This printout, intended for users of the advanced Timing + Machinings step, is used to indicate to the operator assigned to hardware assembly which elements have been selected by the program according to the dimensions. Only accessories coming from an auto-selection depending on the Lia and Hia variables will be included in this printout.
+
The field is activated with the Full diagrams and Diagram accessories printouts and prints only the accessories coming from an auto-selection that depend on the Lia and Hia variables.
 +
{{BR}}
== Structure diagrams prints ==
== Structure diagrams prints ==
-
'''Structure diagrams''' ([[Opera Job Management#Version notes|Available from version 3.6]])<br>
+
[[File:stampaschemistrutture.png|200 px|thumb|Structure diagrams]]
 +
'''Structure diagrams''' <br>
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.
-
'''Structures nodes and machinings''' ([[Opera Job Management#Version notes|Available from version 3.6]])<br>
+
{{BR}}
-
In the case of separate structures, this printout shows the drawing of the individual window/door units with the machinings and the notes entered in the Design Sheet.
+
-
'''Sashes''' ([[Opera Job Management#Version notes|Available from version 3.6]])<br>
+
'''Structures nodes and machinings''' <br>
-
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the [[Material lists management]].
+
In the case of separate structures, this printout shows the drawing of the individual window/door units with the nodes, machining operations, and notes entered in the Design Sheet.
 +
 
 +
{{BR}}
 +
 
 +
'''Structure multiple diagrams'''<br>
 +
This printout allows multiple structure diagrams to be shown in the same document.
 +
 
 +
{{BR}}
 +
 
 +
'''Sashes''' <br>
 +
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the [[Material list management]].
 +
 
 +
{{BR}}
 +
 
 +
'''Structures list'''<br>
 +
This printout shows the list of structures present in the job.
 +
 
 +
{{BR}}
 +
 
 +
'''Structures count'''<br>
 +
This printout shows the count of the structures present in the job.
 +
 
 +
{{BR}}
'''Custom views'''<br>
'''Custom views'''<br>
This printout shows the enlarged detail using the Views function of the Design Sheet.
This printout shows the enlarged detail using the Views function of the Design Sheet.
 +
 +
{{BR}}
'''Nodes'''<br>
'''Nodes'''<br>
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.
-
'''Inscale sections''' ([[Opera Job Management#Version notes|Available from version 3.7]])<br>  
+
{{BR}}
-
This printout reproduces all the typologies with the numeric reference of the node. To obtain this printout, it is necessary to create a node archive.
+
 
 +
'''Inscale sections'''<br>
 +
This printout reproduces the typology nodes while respecting a representation scale.
 +
 
 +
{{BR}}
 +
 
 +
'''Nodes and machinings'''<br>
 +
This printout reproduces the typology nodes with the associated machining operations.
 +
 
 +
{{BR}}
'''ID codes'''<br>
'''ID codes'''<br>
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.
 +
 +
{{BR}}
 +
 +
'''Scheme+ID codes'''<br>
 +
This printout shows the typology diagram with the profile identification codes.
 +
 +
{{BR}}
'''Typology cutting list'''<br>
'''Typology cutting list'''<br>
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.
-
'''Diagram accessories, Typology panes, Shutter'''<br>
+
{{BR}}
-
These printouts respectively show the list of accessories, panes, and shutters required for the whole job.
+
 +
'''Diagram accessories'''<br>
 +
This printout shows the list of accessories required for the job or for the selected typology.
 +
 +
{{BR}}
 +
 +
'''Gaskets'''<br>
 +
This printout shows the list of gaskets required for the job or for the selected typology.
 +
 +
{{BR}}
 +
 +
'''Typology panes'''<br>
 +
This printout shows the list of panes required for the job or for the selected typology.
 +
 +
{{BR}}
 +
 +
'''Shutter'''<br>
 +
This printout shows the data relating to the shutters present in the job or in the typology.
 +
 +
{{BR}}
 +
 +
'''Typology machinings'''<br>
 +
This printout shows the machining operations referring to the single typology.
 +
 +
{{BR}}
== Form data prints ==
== Form data prints ==
-
'''Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns'''
+
[[File:stampaModuli.png|200 px|thumb|Form data]]
 +
'''Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns / Type'''<br>
Using these fields allows different print modes for the job typology form.
Using these fields allows different print modes for the job typology form.
 +
The '''Scale type''', '''Dimensions''', '''Rows''', '''Columns''', and '''Type''' fields may appear greyed out when a form printout has not been selected or when the selected configuration does not require their use.
 +
 +
* '''Typology Form #1''': activates the printout of the first typology form model.
 +
* '''Typology Form #2''': activates the printout of the second typology form model.
 +
* '''Typology Form #3''': activates the printout of the third typology form model.
 +
* '''Scale type''': allows you to define the scale type to be used in the form.
 +
* '''Dimensions''': allows you to indicate whether to print the dimensions in the form.
 +
* '''Rows''': allows you to indicate the number of rows to be used in the print composition.
 +
* '''Columns''': allows you to indicate the number of columns to be used in the print composition.
 +
* '''Type''': allows you to define the representation or composition type of the form.
 +
 +
{{BR}}
 +
 +
'''Language'''<br>
 +
Allows you to select the language to be used for printing documents and reports. The field may appear greyed out when multilingual management is not provided for the selected printout.
 +
 +
{{BR}}
== Function buttons ==
== Function buttons ==
-
The [[File:tastosetupstampe2.png]] button  
+
The [[File:tastosetupstampe2.png]] button<br>
-
This button opens the print setup window; for the contents and operation of this window, see the [[Technical print setup]] paragraph.
+
This button opens the technical sheet print setup window; for the contents and operation of this window, see the [[Technical print setup]] paragraph.
 +
 
 +
{{BR}}
 +
 
 +
The [[File:tastosetupstampemateriali.png]] button<br>
 +
This button opens the [[Parts sheets setup|parts sheet print setup]] window.
 +
 
 +
{{BR}}
The [[File:tastotaglio.png]] button<br>
The [[File:tastotaglio.png]] button<br>
This button opens the cutting parameter setup window; for the contents and operation of this window, see the [[Cutting]] paragraph.
This button opens the cutting parameter setup window; for the contents and operation of this window, see the [[Cutting]] paragraph.
 +
 +
{{BR}}
The [[File:tastodatimodulo.png]] button<br>
The [[File:tastodatimodulo.png]] button<br>
-
This button opens the module data management window and allows you to modify accessory data.
+
This button opens the [[Form data management]] window and allows you to modify document data.
 +
{{BR}}
 +
The [[File:tastoreportesterni.png]] button<br>
 +
This button allows you to access the management of [[External reports]] linked to the printouts.
 +
 +
{{BR}}
 +
 +
The [[File:Tastoabacotip.png]] button<br>
 +
It is activated if the ''Window chart data'' field is enabled and opens the [[Window chart print setup]] window, which allows you to modify the document.
 +
 +
{{BR}}
<!-- HELP: JM/W2841-->
<!-- HELP: JM/W2841-->
[[Category: JM/Manual]]
[[Category: JM/Manual]]

Revision as of 10:25, 12 June 2026

The Printing Options window
Note N.B: To access this window, in the Job management window, select the File:tastoschede.png button.

The Printing Options opened by this button consist of a list of technical, commercial, and operational printouts that meet the different processing and job management requirements.

The operator only needs to select the desired printout and press the Print button.


Contents

The Job report

The File:+.png and File:modifica.png buttons open the Job reports management window and allow you to create or modify a job report, where it is possible to choose and save the documents that are usually printed.

The following images show an example of report creation:

After creating the report, in the Printing Options window it will be possible to select it from the Job report field. Pressing the Print button will show the selected printouts.


Typology prints

Window diagrams

Window diagrams
This printout is used to obtain the typology diagram on a full sheet. One printout will be produced for each typology in the job.


3D Window diagrams

3D Window diagrams
If the typology nodes are present, this printout is used to obtain the 3D typology diagram on a full sheet. One printout will be produced for each typology in the job.


Multiple diagrams

Multiple diagrams
This printout is used to obtain multiple diagrams on a single sheet. A printout with multiple typologies per sheet will be produced.


Typology checks

Typology checks
This printout mainly reproduces the information from General info - type and is a verification printout of the window/door characteristics.


List prints

Job cutting list

Job cutting list
This printout shows the non-optimized cutting list of all typologies in the job.


Cutting optimization

Cutting optimization
This printout shows the optimized cutting list.


Sending the Job cutting list and Cutting optimization printouts is preceded by the Profile selection for cutting lists window:

Profile selection for cutting list
Profile selection for cutting optimization


The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be excluded from the list.

The selected profile can be excluded through the flag associated with each row, also by using the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.

The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.


Profile composition
This printout shows the composition of the profiles used in the job.


Pick up list
This printout allows you to obtain the list of profiles or materials to be picked up for processing.


Source profiles

Source profiles
This printout shows the cutting list of the source profiles, used for making wooden profiles or compound profiles.


2D optimization
This printout allows you to obtain the two-dimensional optimization of materials managed with 2D logic.


Arch cut 1:1

Arch cut 1:1
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.

In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.


Carts

Carts
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.


Job batches

Job batches
This function allows you to print the list of Job batches and the related typologies of the individual batches.


Machining prints

Machinings

Machinings
This printout shows the list of machining operations for the job profiles.


Workcenter profiles

Workcenter profiles
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machining operations that will be carried out.


Workcenter bars
This printout shows the optimized bars processed in the work center.


Selecting the last two printouts activates the following fields, which may appear greyed out in the window when they are not available:

  • Clamps position

This is a printout showing the position of the clamps on the work center.

  • Print machining location

This is a printout showing the position of the machining operations on the profile.

  • Prints front clamp

This is a clamping printout in which the clamped piece is shown from the front.


Window Chart prints

Window Chart

Window Chart
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.


3D Window chart
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.


This section is activated with the Window Chart and 3D Window chart printouts:

    • Window chart data

If selected, it activates the File:Tastoabacotip.png button to open the Window chart print setup window, which allows you to modify the document.

    • Currency File:tastoc.png

Allows you to select the currency to be used in printouts that contain economic values.


Typology list
This printout is very similar to the previous Window Chart printout, but without prices, and activates the Window chart data field.


Job prints

Delivery list

Delivery list
This is a printout that describes the typologies without the window chart.


Structures list
This printout shows the list of structures present in the job.


Trimmings
This printout shows the data relating to the trimmings provided in the job.


Transmittance scheme
Prints the typology diagrams with thermal transmittance.


Bill of Materials
This field allows you to obtain the job bill of materials printout. The contents and operation are the same as those explained for the File:tastodistinta.png button in the Materials window.


Job panes
This is an order printout for the panes of the window/door units in the quotation. It describes their dimensional characteristics and quantities.


Delivering list
This printout allows you to obtain the list of elements or materials provided for delivery.


Doc File:tastoc.png
The associated button opens the document selection window, where it is possible to choose which document to print.


Report File:tastoc.png
The associated button allows you to select a report linked to the printout.


Full diagrams prints

Full diagrams

Full diagrams
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.


Diagram and profiles
Practically identical to the previous one, but without the list of accessories to be assembled.


Diagram accessories
Unlike the previous one, this printout reproduces the typology diagram and the accessories to be assembled.


Only hardware var.
The field is activated with the Full diagrams and Diagram accessories printouts and prints only the accessories coming from an auto-selection that depend on the Lia and Hia variables.


Structure diagrams prints

Structure diagrams

Structure diagrams
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.


Structures nodes and machinings
In the case of separate structures, this printout shows the drawing of the individual window/door units with the nodes, machining operations, and notes entered in the Design Sheet.


Structure multiple diagrams
This printout allows multiple structure diagrams to be shown in the same document.


Sashes
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the Material list management.


Structures list
This printout shows the list of structures present in the job.


Structures count
This printout shows the count of the structures present in the job.


Custom views
This printout shows the enlarged detail using the Views function of the Design Sheet.


Nodes
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.


Inscale sections
This printout reproduces the typology nodes while respecting a representation scale.


Nodes and machinings
This printout reproduces the typology nodes with the associated machining operations.


ID codes
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.


Scheme+ID codes
This printout shows the typology diagram with the profile identification codes.


Typology cutting list
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.


Diagram accessories
This printout shows the list of accessories required for the job or for the selected typology.


Gaskets
This printout shows the list of gaskets required for the job or for the selected typology.


Typology panes
This printout shows the list of panes required for the job or for the selected typology.


Shutter
This printout shows the data relating to the shutters present in the job or in the typology.


Typology machinings
This printout shows the machining operations referring to the single typology.


Form data prints

Form data

Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns / Type
Using these fields allows different print modes for the job typology form.

The Scale type, Dimensions, Rows, Columns, and Type fields may appear greyed out when a form printout has not been selected or when the selected configuration does not require their use.

  • Typology Form #1: activates the printout of the first typology form model.
  • Typology Form #2: activates the printout of the second typology form model.
  • Typology Form #3: activates the printout of the third typology form model.
  • Scale type: allows you to define the scale type to be used in the form.
  • Dimensions: allows you to indicate whether to print the dimensions in the form.
  • Rows: allows you to indicate the number of rows to be used in the print composition.
  • Columns: allows you to indicate the number of columns to be used in the print composition.
  • Type: allows you to define the representation or composition type of the form.


Language
Allows you to select the language to be used for printing documents and reports. The field may appear greyed out when multilingual management is not provided for the selected printout.


Function buttons

The File:tastosetupstampe2.png button
This button opens the technical sheet print setup window; for the contents and operation of this window, see the Technical print setup paragraph.


The File:tastosetupstampemateriali.png button
This button opens the parts sheet print setup window.


The File:tastotaglio.png button
This button opens the cutting parameter setup window; for the contents and operation of this window, see the Cutting paragraph.


The File:tastodatimodulo.png button
This button opens the Form data management window and allows you to modify document data.


The File:tastoreportesterni.png button
This button allows you to access the management of External reports linked to the printouts.


The File:Tastoabacotip.png button
It is activated if the Window chart data field is enabled and opens the Window chart print setup window, which allows you to modify the document.


Retrieved from "http://wiki.operacompany.com/en/index.php/Printing_Options"
Personal tools