Profiles

From Opera Wiki

(Difference between revisions)

Latest revision as of 13:28, 21 June 2024

N.B: To access this window from Opera Job Management: open Archives menu, then select Profiles

This archive is used to store all the profile information, along with their technical data (height, encumbrance, thickness). These data are used by the program in order to output the cutting list, the cutting optimization, to calculate prices, and the required quantity.

Sidebar buttons

: this will allow to edit prices in two ways: selecting Percentage from the popup message box will allow user to edit all prices by a % value; selecting List will open a .csv file containing all the profiles and their prices. After saving, every change to the .csv file will be shown in the following screen. Pressing the button will update the prices within the profiles archive.

Percentage variation

List editing

: if any catalogue has been loaded for the selected profile, it will be shown when pressing the button.

Section 1: general information

Name : The profile code given by the manufacturer or supplier.

Codice 9963
Figura 1.
If used as a sash sill, the dimensions (encumbrance) also include the bottom overlaps.

Codice 9963-T
Figura 2.
If used as a transom, the dimensions do not include the bottom overlaps and are therefore smaller..

Master name:The profile code to be referred to.

NOTE:
A typical example for which it is necessary to use the Master name is when a marine glazing sash sill profile can also be used as transom. In this case, their dimensions (encumbrance) will change when their use is modified. If we look at the following pictures we can see that the profile in Picture 1, called 9963 in this example and usually used as a sash sill, has a smaller encumbrance if used as transom, Picture 2.

This is necessary for loading a new profile that we will call k390-T. This will be an exact copy of the other one, except for changes to the type of use and chamber values . It would be useful to enter k290M as (Master Name) so that 9963 is used for the order to the supplier, in cutting lists, in optimisation lists, etc., rather than the 9963-T, which is only a fictitious profile.

System : : Indicates the name of the system the profile belongs to.

Serie : : Indicates the name of the series the profiles belongs to.

NOTE:
If the profile purchase price relates to the range to which the item belongs, linking the range to the profile is very important to calculate its cost. In this case, if the name of the range is not indicated against the profile, it will not be possible to calculate the cost.

Description: The text describing the characteristics of the profile.

Section 2: buying information

Supplier : Indicates the name of the profile supplier
Weight: The weight of the profile is indicated per metre length.
Type : This is a basic description indicating the type of material used to make the profile.

N.B: Selecting PVC will activate the field Assembly dimension, in which the quantity of the profile consumed during welding is indicated. This value is required to output an accurate cutting list.

Section 3: Assembled profile information

NOTE:
An Assembled profile is made up of different bars, often from different materials, combined together to create the assembled functional profile (or assembled profile). For example, aluminium-wood profiles are usually made up assembling different bars: an aluminium bar, a plastic bar and a wood bar; also bicolour profiles are made with two aluminium bars with different colours. Opera allows the calculation of the assembled profile cost in addition to the calculation of the cost of each single component, even if they have different measurement units amongst them. In case of bicolour profiles, it calculates the cost of the internal and external colours. The programme can output in the materials list the assembled profile code or the codes of every single profile.

Enabling Assembled field will activate the following fields and the button .

List of components: : If enabled, the profile component will be displayed in the part lists.
Taglio componenti: Components cutting
Screw: the screw accessory to use when assembling the profile
Screw thread: average distance between screws. Opera will automatically calculate the required screw number.

Sezione 4: Warehouse and report information

Exclude from lists : If enabled, the profile will be included in any print (cutting list, optimized cutting, supplier orders...)

NOTE:
This function can be used when the profile has the function of false profile with the sole purpose of creating an encumbrance in the typology. In this case, it should not appear in any print-out. Being in fact a fictitious profile, it is therefore necessary to check this box.

Colour. (colouring): the color to assign to the profile inside the job. (Normal,Internal,External,Accessories,Shutter,Panes,Lock,Hinge,Hardware,Wall support,Sash. Int. / Ext color,Glazin bead,Gasket)

Bar length: The length of the entire bar.

Esempio di un profilo reversibile

Esempio di barra ottimizzata con profilo reversibile

Esempio di barra ottimizzata con profilo NON reversibile

Reversible: If enabled, the profiled will be considered as reversible.

NOTE:
this option is used with Z-profiles that can be used in the same way even if turned upside down. This property will be used by the program when calculating the optimised cut, avoiding the unnecessary waste.

Symmetric : the profile will be considered as symmetric in comparison with either the external and the internal surface.

Min leftover: the smalles reusable leftover

Section 5: Technical information

Example of Z profile height

Example of core overhang value

Height : the height of the profile measured perpendicular to its depth..

N.B: In case of fixed frames, moving frames, and T beams, the sum of the clear space + glazing rebate + rebate is given.

Ignore col. thk. (ignore colour thickness): the program will include the thicknesses of the finishe when calculating cutting lists

Core overhang: the distance between core and outer edge of the profile
Assembly dimension: the dimension to add to the cut lenght for welding (used with PVC profiles only)
Cutting step : the average cutting step

NOTE:
This is mainly used when cutting reinforcing for PVC profiles. If, for example, a step of “50 mm” is set, this will avoid the inclusion of decimal values on the cutting list. It will also allow the program to include all cuts that fall within the step value set beforehand. It is also important to note that this function always rounds off “downwards”.

Always at 90° in enabled, the cutting on the profile will always be at 90°

Function: the function(s) of the profile. Opera will consider these information for the cut calculations.
Encumbrance: the encumbrance size
Clrnc (clearance): the clearance size
End mill corr (end mill correction): the end milling correction value

: opens profle prices window.
: opens profile cross sections window.
: opens standard profile accessories window.
: opens profile machinings window.
: opens profile optimization parameters window.
: opens profile finish surface window.
: opens a new archive to set up the assembled profile components
: opens profile price-list management window

N.B: the

button is available only with Price Lists Revision step active

Profiles

From Opera Wiki

Latest revision as of 13:28, 21 June 2024

Contents

Sidebar buttons

Section 1: general information

Section 2: buying information

Section 3: Assembled profile information

Sezione 4: Warehouse and report information

Section 5: Technical information

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 2: / Line 2: @@
 {{NB|To access this window from Opera Job Management: open ''Archives'' menu, then select ''Profiles''}}
-{{WIP}}
-{{BR}}
-<!--
+This archive is used to store all the profile information, along with their technical data (height, encumbrance, thickness). These data are used by the program in order to output the cutting list, the cutting optimization, to calculate prices, and the required quantity.
 __TOC__
-This archive is used to store all the profile information, along with their technical data (height, encumbrance, thickness). These data are used by the program in order to output the cutting list, the cutting optimization, to calculate prices, and the required quantity.
 {{BR}}
 '''Content description'''
-<!--
 ==Sidebar buttons==
-;Il pulsante [[File:tastopercentuale.png]]
+*[[File:tastopercentuale.png]]: this will allow to edit prices in two ways: selecting ''Percentage'' from the popup message box will allow user to edit all prices by a % value;  selecting ''List'' will open a .csv file containing all the profiles and their prices. After saving, every change to the .csv file will be shown in the following screen. Pressing the button [[File:tastoaggiorna.png]] will update the prices within the profiles archive.
-: premendolo si aprirà il seguente riquadro [[File:quadropercentuale.png|400 px]], dal quale avremo diverse possibilità di scelta;
-[[File:quadrovariazionepercentualeprezzi.png|thumb|right|500px|Il quadro di variazione della percentuale dei prezzi]]
-* scegliendo '''Percentuale''' possiamo variare le percentuali dei prezzi che abbiamo inserito nella Serie e il programma le inserisce in automatico.
-{{BR}}
+{|
-[[File:filecsv.png|500 px|thumb|right|La modifica del file .csv]]
+|[[File:quadrovariazionepercentualeprezzi.png|thumb|right|300px|Percentage variation]]
-* scegliendo '''Tabella''' creiamo un file .csv  dove possiamo operare delle modifiche ai dati delle serie.
+|[[File:quadroaggiornamentoprezzi.png|300 px|thumb|right|List editing]]
-Queste modifiche, se corretamente salvate nel file .csv, compaiono nel quadro seguente:
+|}
-[[File:quadroaggiornamentoprezzi.png|300 px|thumb|left|La finestra di riepilogo dell'aggiornamento dei prezzi]]
-Cliccando sul pulsante [[File:tastoaggiorna.png]] aggiorneremo le modifiche nel nostro archivio.
+*[[File:tastocategorie.png]]: if any catalogue has been loaded for the selected profile, it will be shown when pressing the button.
 {{BR}}
-;Il pulsante [[File:tastocategorie.png]]
-: consente di visualizzare il catalogo abbinato ai profili, se questo è presente.
--->
 == Section 1: general information ==
-*'''Name ''': : The profile code given by the manufacturer or supplier.
+*'''Name ''': The profile code given by the manufacturer or supplier.
 {|style="float:right"
 |[[File:9963.png|'''Codice 9963'''<br> '''Figura 1.''' <br> If used as a sash sill, the dimensions (encumbrance) also include the bottom overlaps.|thumb|left|150px]]
 |[[File:9963T.png|'''Codice 9963-T'''<br> '''Figura 2.''' <br> If used as a transom, the dimensions do not include the bottom overlaps and are therefore smaller..|thumb|150px]]
 |}
-*'''Master name''': : The profile code to be referred to.
+*'''Master name''':The profile code to be referred to.
+:{{NOTE|A typical example for which it is necessary to use the Master name is when a marine glazing sash sill profile can also be used as transom. In this case, their dimensions (encumbrance) will change when their use is modified.  If we look at the following pictures we can see that the profile in Picture 1, called 9963 in this example and usually used as a sash sill, has a smaller encumbrance if used as transom, Picture 2.}}
-{{NOTE|A typical example for which it is necessary to use the Master name is when a marine glazing sash sill profile can also be used as transom. In this case, their dimensions (encumbrance) will change when their use is modified.  If we look at the following pictures we can see that the profile in Picture 1, called 9963 in this example and usually used as a sash sill, has a smaller encumbrance if used as transom, Picture 2.}}
 This is necessary for loading a new profile that we will call k390-T. This will be an exact copy of the other one, except for changes to the type of use and chamber values .  It would be useful to enter k290M as (Master Name) so that 9963 is used for the order to the supplier, in cutting lists, in optimisation lists, etc., rather than the 9963-T, which is only a fictitious profile.
@@ Line 53: / Line 40: @@
 *'''Serie '''[[File:frecciagiu.png]]: : Indicates the name of the series the profiles belongs to.
+:{{NOTE| If the profile purchase price relates to the range to which the item belongs, linking the range to the profile is very important to calculate its cost.  In this case, if the name of the range is not indicated against the profile, it will not be possible to calculate the cost.}}
-{{NOTE| If the profile purchase price relates to the range to which the item belongs, linking the range to the profile is very important to calculate its cost.  In this case, if the name of the range is not indicated against the profile, it will not be possible to calculate the cost. }}
+*'''Description''': The text describing the characteristics of the profile.
-*'''Description''': The text describing the characteristics of the profile.
-{{BR}}
 == Section 2: buying information ==
@@ Line 64: / Line 50: @@
 *'''Weight''': The weight of the profile is indicated per metre length.
 *'''Type ''' [[File:frecciagiu.png]]: This is a basic description indicating the type of material used to make the profile.
+:{{NB| Selecting '''PVC''' will activate the field ''Assembly dimension'', in which the quantity of the profile consumed during welding is indicated.  This value is required to output an accurate cutting list.}}
-{{NB| Selecting '''PVC''' will activate the field ''Assembly dimension'', in which the quantity of the profile consumed during welding is indicated.  This value is required to output an accurate cutting list. }}
-{{BR}}
 == Section 3: Assembled profile information ==
-{{NOTE|An ''Assembled profile'' is made up of different bars, often from different materials, combined together to create the assembled functional profile (or assembled profile).  For example, aluminium-wood profiles are usually made up assembling different bars: an aluminium bar, a plastic bar and a wood bar; also bicolour profiles are made with two aluminium bars with different colours.  Opera allows the calculation of the assembled profile cost in addition to the calculation of the cost of each single component, even if they have different measurement units amongst them.  In case of bicolour profiles, it calculates the cost of the internal and external colours.  The programme can output in the materials list the assembled profile code or the codes of every single profile.
+{{NOTE|An ''Assembled profile'' is made up of different bars, often from different materials, combined together to create the assembled functional profile (or assembled profile).  For example, aluminium-wood profiles are usually made up assembling different bars: an aluminium bar, a plastic bar and a wood bar; also bicolour profiles are made with two aluminium bars with different colours.  Opera allows the calculation of the assembled profile cost in addition to the calculation of the cost of each single component, even if they have different measurement units amongst them.  In case of bicolour profiles, it calculates the cost of the internal and external colours.  The programme can output in the materials list the assembled profile code or the codes of every single profile.}}
-{{BR}}
 Enabling '''Assembled''' field will activate the following fields and the button [[File:tastocomponenti.png]].
-*'''List of components''': : Indica al programma che nelle liste dei materiali devono essere visualizzati i codici dei componenti del profilo.
+*'''List of components''': : If enabled, the profile component will be displayed in the part lists.
 *'''Taglio componenti''': Components cutting
 *'''Screw''': the screw accessory to use when assembling the profile
 *'''Screw thread''': average distance between screws. Opera will automatically calculate the required screw number.
-*[[File:tastocomponenti.png]]: opens a new archive to set up the [[Assembled profile components|assembled profile components]]
 {{BR}}
-<!--
-== Sezione 4: dati relativi alle distinte e al magazzino ==
-;'''Escludi dalle distinte'''
-:Indica al programma che il profilo deve essere escluso da qualunque stampa (lista di taglio, taglio ottimizzato, ordine al fornitore, ecc...). Un caso in cui può essere addottata la tecnica di esclusione dalle distinte può essere quando il profilo ha funzione di finto profilo avente solo lo scopo di creare un ingombro nella tipologia. In questo caso non deve comparire in nessuna stampa, in quanto trattasi appunto di un profilo fittizio, per cui si rende necessaria l’attivazione di questa casella.
-;'''Coloraz.''' (colorazione)[[File:frecciagiu.png]]
+== Sezione 4: Warehouse and report information  ==
-:Determina quale colorazione dovrà acquisire il profilo nella commessa. Vengono proposte diverse scelte qui di seguito spiegate.
-:*'''Normale''': Significa che il profilo assumerà la colorazione come è stata assegnata alla commessa, distinguendo tra colorazione interna e colorazione esterna. Se per esempio è stata assegnata alla commessa una colorazione per la parte interna ed un’altra per la parte esterna il profilo sarà considerato bicolore.
-:*'''Interna''': Il profilo assumerà la colorazione interna della commessa.
-:*'''Esterna''': Il profilo assumerà la colorazione esterna della commessa.
-:*'''Accessori''': Il profilo assumerà la colorazione assegnata agli accessori.
-:*'''Avvolgibile''': Il profilo assumerà la colorazione assegnata all’avvolgibile.
-:*'''Riempimenti''': Il profilo assumerà la colorazione assegnata ai riempimenti.
-:*'''Serratura''': Il profilo assumerà la colorazione assegnata alla serratura.
-:*'''Cerniere''': Il profilo assumerà la colorazione assegnata alle cerniere.
-:*'''Ferramenta''': Il profilo assumerà la colorazione assegnata alla ferramenta.
-:*'''Controtelaio''': Il profilo assume la colorazione assegnata al controtelaio
-:*'''Color. Int. / Est ante''': Il profilo assume la colorazione in funzione della colorazione interna e d esterna delle ante
-:*'''Fermavetro''': Il profilo assume la colorazione assegnata al fermavetro
-:*'''Guarnizione''' : Il profilo assume la colorazione assegnata alla guarnizione
-;'''L. barra''' (Lunghezza barra)
+*'''Exclude from lists ''': If enabled, the profile will be included in any print (cutting list, optimized cutting, supplier orders...)
-:È la lunghezza della barra intera.
+:{{NOTE| This function  can be used when the profile has the function of false profile with the sole purpose of creating an encumbrance in the typology.  In this case, it should not appear in any print-out.  Being in fact a fictitious profile, it is therefore necessary to check this box.}}
-;'''Reversibile'''
+*'''Colour.''' (colouring)[[File:frecciagiu.png]]: the color to assign to the profile inside the job. (''Normal'',''Internal'',''External'',''Accessories'',''Shutter'',''Panes'',''Lock'',''Hinge'',''Hardware'',''Wall support'',''Sash. Int. / Ext color'',''Glazin bead'',''Gasket'')
-:Indica al programma se il profilo è reversibile o meno. La proprietà di reversibilità di un profilo, valida per i profili a Z, è data quando questo può essere impiegato allo stesso modo anche capovolto. Questa proprietà verrà sfruttata dal programma nel calcolo del taglio ottimizzato evitando che vengano prodotti spezzoni inutili.
-<gallery>
+*'''Bar length''': The length of the entire bar.
+<gallery style="float:right">
 File:profiloz.png|Esempio di un profilo reversibile
 File:barrareversibile.png|Esempio di barra ottimizzata con profilo reversibile
 File:barrareversibile2.png|Esempio di barra ottimizzata con profilo NON reversibile
 </gallery>
+*'''Reversible''': If enabled, the profiled will be considered as reversible.
+:{{NOTE| this option is used with Z-profiles that can be used in the same way even if turned upside down.  This property will be used by the program when calculating the optimised cut, avoiding the unnecessary waste.}}
-;'''Simmetrico'''
-:Attivata questa casella rende il profilo simmetrico rispetto alle superfici interna ed esterna. Può essere utilizzata quando è possibile applicare un asse di simmetria verticale nel profilo.
+*'''Symmetric''' : the profile will be considered as symmetric in comparison with either the external and the internal surface.
-;'''Spezzone min.'''
+*'''Min leftover''': the smalles reusable leftover
-:È il valore dello spezzone minimo riutilizzabile. La specifica ''Auto'' indica che il profilo adotterà il valore impostato nei parametri relativi al taglio; vedi anche il paragrafo '''Taglio''', nel capitolo '''Opzioni'''.
 {{BR}}
-== Sezione 5: Dati tecnici ==
-;'''Altezza'''
+== Section 5: Technical information ==
-: l’altezza del profilo sul piano di Taglio, misurata perpendicolarmente alla profondità.
-{{NB|Solo per il riporto scorrevole l'altezza deve coincidere con il valore della camera.}}
-;'''Ignora spess. col.''' (Ignora spessore colorazione)
+<gallery style="float:right">
-:Indica al programma che durante il calcolo delle liste di taglio non deve essere considerato lo spessore della finitura.
+File:profiloz2.png|Example of Z profile height
-Lo spessore della finitura è indicato nei dati della colorazione, in [[Archivio colorazioni]].
+File:profiloz3.png|Example of core overhang value
-{{BR}}
-<gallery>
-File:profiloz2.png|Esempio di altezza di un profilo
-File:profiloz3.png|Esempio di valore relativo alla differenza tubolarità
 </gallery>
-;'''Diff.tubol.''' (differenza tubolarità)
+*'''Height ''': the height of the profile measured perpendicular to its depth..
-:si tratta della lunghezza dell’aletta di battuta misurata sino alla tubolarità del profilo.
+:{{NB|In case of fixed frames, moving frames, and T beams, the sum of the clear space + glazing rebate + rebate is given.}}
-{{BR}}
-;'''Quota Saldatura'''
+*'''Ignore col. thk. ''' (ignore colour thickness): the program will include the thicknesses of the finishe when calculating cutting lists
-:In questa casella attiva solo se nel campo '''Tipo''' scegliamo profili in Pvc , si determina la quota della saldatura dei profili che si somma alla quota di taglio.
-;'''Step Taglio'''
+*'''Core overhang''': the distance between core and outer edge of the profile
-:E’ il valore di arrotondamento del taglio dei profili. Questa funzione risulterà particolarmente utile nella gestione dei tagli dei rinforzi dei profili in PVC. Impostando infatti una misura di step, ad esempio “50 mm.”, eviteremo di trovare nelle distinte di taglio tutti i tagli con valori decimali, consentendo al programma di accorpare i tagli che rientreranno nel valore di step precedentemente impostato. E’ inoltre importante sapere che questa funzione arrotonda sempre per “difetto”.
+*'''Assembly dimension''': the dimension to add to the cut lenght for welding (used with PVC profiles only)
+*'''Cutting step ''': the average cutting step
+:{{NOTE| This is mainly used when cutting reinforcing for PVC profiles.  If, for example, a step of “50 mm” is set, this will avoid the inclusion of decimal values on the cutting list.  It will also allow the program to include all cuts that fall within the step value set beforehand.  It is also important to note that this function always rounds off “downwards”.}}
-;'''Sempre a 90°'''
+*'''Always at 90°''' in enabled, the cutting on the profile will always be at 90°
-:Se attivata, questa funzione impone al programma di tagliare il profilo a 90 gradi.
-;'''Utilizzo'''
+*'''Function''': the function(s) of the profile. Opera will consider these information for the cut calculations.
-:Riporta la funzione del profilo. In base all’utilizzo impostato compariranno alcune caselle dove dovranno essere riportati i valori tecnici del profilo. Questi dati saranno presi in considerazione dal programma durante il calcolo dei tagli.
+*'''Encumbrance''': the encumbrance size
-La spiegazione dei dati tecnici richiesti è riportata nell’ '''Appendice I''', '''Dati tecnici dei profili in base agli utilizzo'''.
+*'''Clrnc''' (clearance): the clearance size
+*'''End mill corr''' (end mill correction): the end milling correction value
-;'''Sist.vetro''' (Sistema fermavetro)
+<!--
-:Questa casella riporta il sistema di montaggio del vetro. Nel menù a tendina possiamo scegliere fra i seguenti:
+*'''Glazing system ''' (Glazing bead system): the glass assembly system. One of the following three options may be set :
-:*'''Nessuno''': Indica che il profilo non è predisposto per l’applicazione di un riempimento.
+:*'''None''': Indica che il profilo non è predisposto per l’applicazione di un riempimento.
-Il valore Nessuno nel campo Sist.vetro è utilizzato solitamente quando un riporto posizionato all’interno della specchiatura non è predisposto per accettare riempimenti, in modo da indicare al programma che deve utilizzare i dati per il riempimento contenuti nel telaio e non nel riporto in questione.
+:{{NOTE| The ''None'' value in the Glazing bead system field is often used when a frame filler inside the panelling is not preset to accept panes so to instruct the program that it has to use the pane data contained in the frame and not in the above mentioned frame filler. }}
 :*'''a scatto''': quando il profilo necessita dell’applicazione di un fermavetro per il fissaggio del riempimento.
@@ Line 168: / Line 131: @@
 :*'''a infilare''': Quando il profilo ha in sè le alette per il bloccaggio del vetro quindi non ha bisogno di fermavetro.
+-->
-*Il pulsante [[File:tastoprezzi.png]] apre la finestra di gestione dei [[Prezzi profilo|prezzi del profilo]].
+*[[File:tastoprezzi.png]]: opens [[Profie prices|profle prices window]].
-*Il pulsante [[File:tastosezione.png]] serve per aprire il quadro che consente di creare o modificare il [[Sezioni profilo|disegno sezionale del profilo]].
+*[[File:tastosezione.png]]: opens [[Profile cross-sections|profile cross sections window]].
-*Il pulsante [[File:tastoaccessori.png]] serve per aprire l’archivio degli [[Accessori standard profilo|accessori standard del profilo]].
+*[[File:tastoaccessori.png]]: opens [[Profile accessories|standard profile accessories window]].
-*Il pulsante [[File:tastolavorazioni.png]] serve per l’assegnazione dei costi e delle [[Lavorazioni profilo|lavorazioni di centinatura]].
+*[[File:tastolavorazioni.png]]: opens [[Profile machinings|profile machinings window]].
-*Il pulsante [[File:tastoottimizza.png]] apre il quadro dei [[Parametri di ottimizzazione|parametri di ottimizzazione]].
+*[[File:tastoottimizza.png]]: opens [[Profile optimization parameters|profile optimization parameters window]].
-*Il pulsante [[File:tastosuperficie.png]] apre il quadro di [[Gestione superfici|gestione superfici finitura del profilo]].
+*[[File:tastosuperficie.png]]: opens [[Profile finish surface|profile finish surface window]].
-*Il pulsante [[File:tastolistino2.png]] apre il quadro di [[gestione prezzi listino]] del profilo selezionato. Il pulsante è attivo solo in presenza di una revisione listino.
+*[[File:tastocomponenti.png]]: opens a new archive to set up the [[Assembled profile components|assembled profile components]]
+*[[File:tastolistino2.png]]: opens [[Profile price-lists|profile price-list management window]]
+:{{NB| the [[File:tastolistino2.png]] button is available only with Price Lists Revision step active}}
-{{BR}}
-== '''Voci correlate''' ==
-* [[Come creare un profilo|Come creare un nuovo profilo]]
-* [[Come fare un profilo scorrevole]]
-* [[Archivio Sistemi]]
-* [[Archivio Tipologie]]
-* [[Archivio Nodi]]
-* [[Classi di utile]]
-* [[Dati azienda]]
-* [[Dati tecnici dei profili in base agli utilizzi]]
-* [[Manuale Lavorazioni]]
--->
 <!-- HELP: JM/W152 -->
 [[Category: JM/Manual]]