View source

[[Image:finestraarchiviotroncatrici.png|thumb|500px]]


This archive is used to store all the data about the technical feature of the saw machines. These informations is required to output a correct optimized list, the clamping of the profiles, the electronic file export and more.

'''Content description'''

*'''Name''': the name of the saw machine
*'''Desc''': saw machine description
*'''Icon''': the saw machine manufacturer logo
*'''Blade width''': the saw machine blade thickness 
*'''Correction value''': The possible additional dimension to set out on the pallet to obtain the actual cut dimension.  Leave the value at zero if you do not use it. 
*'''Cutting board lifting''': This field reports the thickness value of a possible leaning slab upon the cutting board, it indicate the distance amid the profile’s leaning point and the cutting board.
*'''N° of blades''': the number of blades the saw machine work with
*'''Dimension type''': the type of dimension that has to be indicated in the cut print-out for 45° cutting. The type can be ''External'', ''Internal'', ''Profile core'', ''Saw machine'', ''Gauger''.
*'''Unit of measure''': the measuring unit for the accessory
*'''Checkout''': the side for the unloading from the saw machine
*'''Predefined profile reversal''': reversal predefined setting left/right for profiles
*'''No labels''': if enabled, opera will not print labels for the profiles associated with this saw machine
*'''No cutting list''': if enabled, opera will not print the cutting list for the profiles associated with this saw machine



*[[image:tastodizionario.png]]: opens [[Saw dictionary|Saw dictionary window]]
*[[image:tastotiming2.png]]: opens [[Saw timing parameters]]
*[[image:tastomorse.png]]: opens [[Saw machine clamps]]
*[[image:tastomapping.png]]: opens [[Saw machine map setting|Map setting]]
*[[image:tastoparametri2.png]]:opens [[Saw machine parameters|Saw machine parameters]]
*[[image:tastovariabili.png]]: opens [[Saw machine variables]]
*[[image:tastoformato.png]]: opens [[Saw machine format parameters|Saw machine format parameters]]
<!-- HELP: JM/W160-->
[[Category:JM/Manual]]