Variables

From Opera Wiki

Revision as of 08:25, 8 April 2020 by Fabrizio.Loddo (Talk | contribs)
Jump to: navigation, search

Variables

Variables are used to set condition and rules in the software. You can use a variable in an automatic selection, to choose one accessory rather than a different one, to define components of an assembled profile and many others...

Here follows the full set of variables available in the software:


Name Description
A # of the sash to which the profile of accessory is assigned. A=0 is used for the frame , A=1 is the first sash (from the left), A=2 the secondo sash...
A1 Cutting angle (left/bottom) of the profile. Allowed values: 45°/90.
A2 Cutting angle (right/top) of the profile. Allowed values: 45°/90.
Alt Height of the target profile
Ap Opening side of the structure. Ap=1Verso di apertura della struttura. Allowed values: Ap=1 (left opening) / Ap=2 (right opening.
Av Dimension of the glass overlap of target profile.
Bin Rail number (only for sliding structures). Allowed values: the number of the current track of the target profile
Cam The encumbrance value of the targe profile, as from the profile data.
Comp Blade compensation quota
Fa Alternative side. This is used for profiles belonging to multiple structures (i.e mullions/transoms) Allowed values: 0 (structure 1) / (1 structure 2)
H Typology height.
Ha Sash height(outer edge - outer edge).
Hav Roller shutter height.
Hf Structure height without overlaps.
Hia Internal sash height.
His Structure height without overlaps.
Hs Structure height.
Hsa Total height of glass space (sash)
Hsp Height of glass space in the current structure.
Hsr Lock height.
Ht Transom height
Ht2 Transom height (2)
Hta Height of sash core.
Hts Height of frame core
L Typology width.
La Sash width (outer edge-outer edge).
Lato Side of the structure of.
Lav Roller shutter width.
Lf Internal width of the structure.
Li Profile lenght (inner)
Lia Internal Sash width
Lis Internal Structure width.
Lp Lenght of profile (outer edge-outer edge).
Ls External structure width.
Lsa Sash pane width.
Lsp Horizontal glass space.
Lt Profile lenght (for cutting)
Lta Width of sash core
Lts Width of frame core
N Accessory n°. For legacy purposes, cannot be used on standard version
Na Number of sashes in the current structure
Nst Number of shutter blades in the current structure.
OCam Overall encumbrance of the two side-by-side frames
Ost Blades offset
Pa Total weight of the sash.
Pav Total weight of the roller shutter
Pm Mullion position.
Pos Position of the accessory on the profile. Allowed values: 0 (center)/ 1 (LHS) / 2 (RHS)
Posp Profile position
Pt Total weight of the frame.
Pv Total weight of the frame.
Pz Number of parts.
Qt Computed dimension.

For legacy purposes, cannot be used on standard version

Qtpg Total surface.
Quad Glass total surface.
Rdo Panel leftover. This is the trimming dimension of the last panel.
Rif Reference.
Rst Shutter blades leftover. This is the remaining empty space after applying the shutter blades over the structure. It's generally used to choose the right end shutter blade
Sav Shutter surface.
Spes The thickness of the target profile
Spr Glass thickness.
Sr Shifting of the hardware contact.
TA1 Left profile angle.
TA2 Right profile angle.
Te Structure type. Allowed values: 1..15 depending on the structure index in worksheet(Fixed=1; Tilt&Turn=4; …… Shutter box=15)
Tfs Shape type Allowed values:0 (straight)/ 1 (slanted) / 2= (arch).
Tpt Frame position type
Tub Core overhang

Symbols

Name Description
+ Sum
- Subtraction
* Multiplication
/ Division
> Greater than
< Less than
>= Greater than or equal to
<= Less than or equal to
= Equal to
<> opp. != Not equal
& AND logical
| OR logical
Personal tools