Variables

From Opera Wiki

Variables

Variables are used to set condition and rules in the software. You can use a variable in an automatic selection, to choose one accessory rather than a different one, to define components of an assembled profile and many others...

Here follows the full set of variables available in the software:

Symbols

Name	Description
A	# of the sash to which the profile of accessory is assigned. A=0 is used for the frame , A=1 is the first sash (from the left), A=2 the secondo sash...
A1	Cutting angle (left/bottom) of the profile. Allowed values: 45°/90.
A2	Cutting angle (right/top) of the profile. Allowed values: 45°/90.
Alt	Height of the target profile
Ap	Opening side of the structure. Ap=1Verso di apertura della struttura. Allowed values: Ap=1 (left opening) / Ap=2 (right opening.
Av	Dimension of the glass overlap of target profile.
Bin	Rail number (only for sliding structures). Allowed values: the number of the current track of the target profile
Cam	The encumbrance value of the targe profile, as from the profile data.
Comp	Blade compensation quota
Fa	Alternative side. This is used for profiles belonging to multiple structures (i.e mullions/transoms) Allowed values: 0 (structure 1) / (1 structure 2)
H	Typology height.
Ha	Sash height(outer edge - outer edge).
Hav	Roller shutter height.
Hf	Structure height without overlaps.
Hia	Internal sash height.
His	Structure height without overlaps.
Hs	Structure height.
Hsa	Total height of glass space (sash)
Hsp	Height of glass space in the current structure.
Hsr	Lock height.
Ht	Transom height
Ht2	Transom height (2)
L	Typology width.
La	Sash width (outer edge-outer edge).
Lato	Side of the structure of.
Lav	Roller shutter width.

Name	Description
+	Sum
-	Subtraction
*	Multiplication
/	Division
>	Greater than
<	Less than
>=	Greater than or equal to
<=	Less than or equal to
=	Equal to
<> opp. !=	Not equal
&	AND logical
|	OR logical