How to manage opening sides

From Opera Wiki

Revision as of 15:12, 6 March 2024 by Monica.Sanna (Talk | contribs)
Jump to: navigation, search

Contents

Note N.B: To access this box in Opera Job Management: from the typologies archive, after selecting a typology press the button Image:tastoprogettazione.png

After creating the structure, press the button image:tastomanovra.png; its effect will be different depending on the number of doors of the structure present in the sheet


Structure with 1 door

The muntins will be reversed, including accessories.

Before pressing the button
After pressing the button. The door muntins were reversed including their accessories.

Structure with 2 doors

all the profiles of the central node, including the accessories, will be reversed.

Before pressing the button
After pressing the button. All the profiles of the central node were reversed including their accessories.

Structure with 3 doors

The request on the side will be showed:

  • Choosing File:tastonodo.png, the program will switch all node profiles related to the handle, including their accessories.
Before pressing the button.
After pressing the button. All the profiles of the central node related to the handle have been reversed including their accessories.
  • Choosing instead File:manovraante.png, the program will switch the position of the semi-fixed doors and will put the opening door on the opposite side.
Before pressing the button.
After pressing the button. The position of the half-fixed doors was switched, the opening door was moved to the opposite side from the original position.
  • Choosing File:manovragira.png, the program will reverse the opening direction only of the door where there is a handle.

Sliding Structure and Lift – and – Slide Structure

The maneuvering function in case of sliding or lifting-sliding structures acts in a more complex way by going to reverse several parameters:

  • Side frameworks are reversed, so all components in the left side will be moved to the right side and vice versa
  • Doors, will be switched and reversed.
  • The central node will be mirrored and reversed
  • The rails will be reversed by bringing the door that was in the inner rail, to the outer rail and vice versa.
Before pressing the button.
After pressing the button. The structure is completely mirrored and the rails reversed.
Personal tools