Profile machinings
From Opera Wiki
Revision as of 10:47, 16 May 2011 by Fabrizio.Loddo (Talk | contribs)
N.B: To access this window: from Profiles select 
buttonThis windows allows to assign a set of machinings to the profile, along with their costs.
Content description
: allows to import every machining of a profile and assign to a new one.
- Name
: the machining to assign to the profile-
- Desc: the machining description.
- Cost: the machining cost. If left blank, Opera will calculate automatically the cost using values set in Company data
- Autom
: a set of automatic operations that Opera can manage to choose from. The machining cost will be automatically calculated.
- Angle: the automatic operation angle.
N.B: this field is ebabled only when Contact is chosen in Autom. field..- Profile : the selected machining will be done only when the profile in this field is present.
N.B: this field is ebabled only when Contact,Crossing or Receiver is chosen in Autom. field..- Structure: the structure type.
N.B: this field is ebabled only when Structure is chosen in Autom. field..- Offset: the machining offset. (set positive values for bottom/right offset and negative for top/left offsets)
- Condition : the condition to be set for performing the operations
- Position : the machining posizion (left = left side of the profile, right = right side of profile, none = central machining)
- From the right: the machining position is drawn from the right compensating possible cutting errors
- Profile component type : sets the profile to which assign the machining when the selected profile is an assembled one.
Nel caso di un profilo composto, questa funzione consente di determinare su quale componete applicare la lavorazione. Se, ad esempio, si tratta di profili in Alluminio legno composti da un componente interno ed uno esterno.
