Threshold
From Opera Wiki
Contents |
Camera
This is the footprint value measured perpendicular to the thickness, excluding the value of the glass rebate flap.
Soglia.png
Example of a threshold profile chamber with glass rebate flap |
Soglia2.png
Room example of a threshold profile without a glass rebate flap |
Glass wing
This is the length of the glass rebate flap.
Soglia3.png
Example of glass wing of a threshold profile |
Thickness
This is the thickness of the profile measured on the housing side of the glass.
Intercapedine
This is the distance between one profile and the other measured from the beginning of the chamber of one to the beginning of the chamber of the other.
Soglia4.png
Example of gap between threshold and movable frame |
No perimeter seals
If the field is active, it does not apply perimeter seals.
Intesta a
It tells the program that it should consider the value set in the Header box.
N.B: The addition value related to heading is normally that of the profile tooth to which the profile to be headed is to be connected. However, it is possible to indicate to the program that it should consider another addition value that is, the one set in the Header box.Intestatura
It is the profile elongation value for the bowing operation.
N.B: This value is considered only if the box Headed to has been activated.
