Saw dictionary

From Opera Wiki

Click on the image to enlarge

The saw dictionary is used to settle some essential features for each profile for a correct execution of the cutting procedure.

Content description

• Profile : the associated button opens the profile selection, allowing to choose a profile profile to add
• Code: some machines do not recognize profiles with long codes: this field allows to associate a smaller code to the chosen profile. The new code will be sent to the machine within the cutting instruction file.
• Series:
• Standard saw machine: if enabled, set the current saw machine as the default one to cut the chosen profile.
• No color correction: if enabled, opera will not calculate the color thickness for vertical profile.
• Spinning : this field allows to place the profile acoording its real position on the cutting board
• Invert: if enabled, the profile will be reversed

NOTE:
If you own Timing + Machining step, the machining positions for the profile will also be reversed

• Time of cut: mean time for the cutting in seconds
• EWL/EWR: the left/right waste edge size
• CW: the cutting waste size
• Clamping name: the clamping code, in case more clampings are needed due to different position to work with the clamp
• Clamp : the clamp name in the workcenter to use for this profile
• Gauger dimension File:Tastom.png: the reference dimension for the gauger in comparison with the external tip
• Offset X / Offset Y File:Tastom.png: the profile orizontal/vertical shifting in the clamps.