Opera Wiki - User contributions [en]

File:Fascicolo2.png

2026-06-09T15:34:36Z

Luca.cadeddu:

File:Fascicolo.png

2026-06-09T15:33:31Z

Luca.cadeddu:

Printing Options

2026-06-09T15:33:18Z

Luca.cadeddu: /* The Job report */

[[File:quadroopzionidistampa.png|500 px|thumb|right|The Printing Options window]]
{{NB|To access this window, in the [[Job_Management|Job management]] window, select the [[File:tastoschede.png]] button.}}

The Printing Options opened by this button consist of a list of technical sheets that meet the most varied processing requirements.
The operator only needs to select the one to be sent to print and press the [[File:tastook.png]] button.
{{BR}}

== The Job report ==

The [[File:+.png]] and [[File:modifica.png]] buttons
Using these buttons opens the [[Job reports management]] window and allows you to create a job report folder where it is possible to choose and save the documents that are usually printed.
The following images show an example of creating the folder:
[[File:fascicolo.png|thumb|left|400 px]][[File:fascicolo2.png|thumb|center|400 px]]
After creating the folder, the new field will appear in the Printing Options window and pressing the [[File:ok.png]] button will show the selected prints.
{[BR}}

== Typology prints==
[[File:schemitipologie.png|200 px|thumb|Window diagrams]]
'''Window diagrams''' 
This printout is used to obtain the window diagram on a full sheet. One printout will be produced for each typology in the job.
{{BR}}
[[File:schemitipologie3D.png|200 px|thumb|3D Window diagrams]]
'''3D Window diagrams''' 
If the typology nodes are present, this printout is used to obtain the 3D window diagram on a full sheet. One printout will be produced for each typology in the job.
{{BR}}
[[File:schemimultipli.png|200 px|thumb|Multiple diagrams]]
'''Multiple diagrams''' 
This printout is used to obtain multiple diagrams on a single sheet. A printout with a maximum of 4 typologies per sheet will be produced.
{{BR}}
[[File:schemaverificatipologie.png|200 px|thumb|Typology checks]]
'''Typology checks''' 
This printout mainly reproduces the information from General info - type; it is a verification printout of the window/door characteristics.
{{BR}}

== Lists prints==
[[File:distintaditaglio.png|200 px|thumb|Job cutting list]]
'''Job cutting list''' 
This printout shows the non-optimized cutting list of all typologies in the job.
{{BR}}
[[File:ottimizzazioneditaglio.png|200 px|thumb|Cutting optimization]]
'''Cutting optimization''' 
This printout shows the optimized cutting list.
{{BR}}

Sending these two technical printouts is preceded by the Profile selection for cutting lists window:
[[File:selezioneprofilidistintataglio.png|400 px|thumb|left|Profile selection for cutting list]] [[File:selezioneprofiliottimizzaionetaglio.png|500 px|thumb|center|Profile selection for cutting optimization]]
{{BR}}
The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be removed from the list. The selected profile can be removed with the mouse by selecting the flag associated with each row, or by pressing the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.
The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.

{{BR}}
[[File:Profilisorgente.png|200 px|thumb|Source profiles]]
'''Source profiles''' 
This printout shows the cutting list of the source profiles, used for making wooden profiles.
{{BR}}
[[File:tagliarco.png|200 px|thumb|Arch cut 1:1]]
'''Arch cut 1:1''' 
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.
In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.
{{BR}}
[[File:stampacarrelli.png|200 px|thumb|Carts]]
'''Carts''' 
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.
{{BR}}
[[File:stampafasicommessa.png|200 px|thumb|Job batches]]
'''Job batches''' 
This function allows you to print the list of ''Job batches'' and the related typologies of the individual batches.

== Machining prints ==

'''Machinings''' 
This printout shows the list of machinings for the job profiles.

'''Workcenter profiles''' 
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machinings that will be carried out.

'''Workcenter bars''' 
This printout shows the optimized bars processed in the work center.

'''Clamps position''' 
This is a printout related to the use of Timing + Machinings, where the clamping characteristics of the profiles and the position of the clamps on the work center are shown.

== Schedule prints==

'''Window Chart''' 
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.

'''3D Window chart''' 
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.

'''Typology list''' 
This printout is very similar to the previous one, but without prices.

'''Delivery list''' 
This is a printout that describes the typologies without the window chart.

== Job prints ==

'''Transmittance scheme''' 
Prints the typology diagrams with thermal transmittance.

'''Bill of Materials''' 
This field allows you to obtain the order printout for the supplier. The contents and operation are the same as those explained for the [[File:tastodistinta.png]] button in the Materials window.

'''Job panes''' 
This is an order printout for the fillings of the window/door units in the quotation. It describes their dimensional characteristics and quantities.

'''Doc''' [[File:tastoc.png]] 
The associated button opens the Document selection window, where the document to be printed can be selected. Matching the selected document proposes a series of choices relating to currency, payment methods, and delivery times. This data will appear in the printed document.

== Full diagrams prints==

'''Full diagrams''' 
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.

'''Diagram and profiles''' 
Practically identical to the previous one, but without the list of accessories to be assembled.

'''Diagram accessories''' 
Unlike the previous one, this reproduces the typology diagram and the accessories to be assembled.

'''Only hardware var.''' 
This printout, intended for users of the advanced Timing + Machinings step, is used to indicate to the operator assigned to hardware assembly which elements have been selected by the program according to the dimensions. Only accessories coming from an auto-selection depending on the Lia and Hia variables will be included in this printout.

== Structure diagrams prints ==

'''Structure diagrams''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.

'''Structures nodes and machinings''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
In the case of separate structures, this printout shows the drawing of the individual window/door units with the machinings and the notes entered in the Design Sheet.

'''Sashes''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the [[Material lists management]].

'''Custom views''' 
This printout shows the enlarged detail using the Views function of the Design Sheet.

'''Nodes''' 
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.

'''Inscale sections''' ([[Opera Job Management#Version notes|Available from version 3.7]]) 
This printout reproduces all the typologies with the numeric reference of the node. To obtain this printout, it is necessary to create a node archive.

'''ID codes''' 
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.

'''Typology cutting list''' 
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.

'''Diagram accessories, Typology panes, Shutter''' 
These printouts respectively show the list of accessories, panes, and shutters required for the whole job.

== Form data prints ==

'''Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns'''
Using these fields allows different print modes for the job typology form.

== Function buttons ==

The [[File:tastosetupstampe2.png]] button
This button opens the print setup window; for the contents and operation of this window, see the [[Technical print setup]] paragraph.

The [[File:tastotaglio.png]] button 
This button opens the cutting parameter setup window; for the contents and operation of this window, see the [[Cutting]] paragraph.

The [[File:tastodatimodulo.png]] button 
This button opens the module data management window and allows you to modify accessory data.


[[Category: JM/Manual]]

Printing Options

2026-06-09T15:31:51Z

Luca.cadeddu: /* The Job report */

[[File:quadroopzionidistampa.png|500 px|thumb|right|The Printing Options window]]
{{NB|To access this window, in the [[Job_Management|Job management]] window, select the [[File:tastoschede.png]] button.}}

The Printing Options opened by this button consist of a list of technical sheets that meet the most varied processing requirements.
The operator only needs to select the one to be sent to print and press the [[File:tastook.png]] button.
{{BR}}

== The Job report ==

The [[File:+.png]] and [[File:modifica.png]] buttons
Using these buttons opens the [[Job reports management]] window and allows you to create a job report folder where it is possible to choose and save the documents that are usually printed.
The following images show an example of creating the folder:
[[File:fascicolo3.png|thumb|left|400 px]][[File:fascicolo2.png|thumb|center|400 px]]
After creating the folder, the new field will appear in the Printing Options window and pressing the [[File:ok.png]] button will show the selected prints.
{[BR}}

== Typology prints==
[[File:schemitipologie.png|200 px|thumb|Window diagrams]]
'''Window diagrams''' 
This printout is used to obtain the window diagram on a full sheet. One printout will be produced for each typology in the job.
{{BR}}
[[File:schemitipologie3D.png|200 px|thumb|3D Window diagrams]]
'''3D Window diagrams''' 
If the typology nodes are present, this printout is used to obtain the 3D window diagram on a full sheet. One printout will be produced for each typology in the job.
{{BR}}
[[File:schemimultipli.png|200 px|thumb|Multiple diagrams]]
'''Multiple diagrams''' 
This printout is used to obtain multiple diagrams on a single sheet. A printout with a maximum of 4 typologies per sheet will be produced.
{{BR}}
[[File:schemaverificatipologie.png|200 px|thumb|Typology checks]]
'''Typology checks''' 
This printout mainly reproduces the information from General info - type; it is a verification printout of the window/door characteristics.
{{BR}}

== Lists prints==
[[File:distintaditaglio.png|200 px|thumb|Job cutting list]]
'''Job cutting list''' 
This printout shows the non-optimized cutting list of all typologies in the job.
{{BR}}
[[File:ottimizzazioneditaglio.png|200 px|thumb|Cutting optimization]]
'''Cutting optimization''' 
This printout shows the optimized cutting list.
{{BR}}

Sending these two technical printouts is preceded by the Profile selection for cutting lists window:
[[File:selezioneprofilidistintataglio.png|400 px|thumb|left|Profile selection for cutting list]] [[File:selezioneprofiliottimizzaionetaglio.png|500 px|thumb|center|Profile selection for cutting optimization]]
{{BR}}
The function of this window is to allow the selection of the profiles to be shown in the cutting list. It is very useful when some profiles must be removed from the list. The selected profile can be removed with the mouse by selecting the flag associated with each row, or by pressing the space bar on the keyboard. From this window it is also possible to obtain a preliminary printout of the profiles.
The printout shows the codes, sections, and number of bars to be taken from the racks and brought to cutting.

{{BR}}
[[File:Profilisorgente.png|200 px|thumb|Source profiles]]
'''Source profiles''' 
This printout shows the cutting list of the source profiles, used for making wooden profiles.
{{BR}}
[[File:tagliarco.png|200 px|thumb|Arch cut 1:1]]
'''Arch cut 1:1''' 
This list shows the data of the final operation, that is, cutting the arch allowance with the correct cutting angle. The program provides one printout for each angle.
In the printout, the operator has all the data required to complete the bending and the final cutting of the profile. In addition, the program inserts the final part of the profile at full scale; this feature is very useful for the operator preparing to cut, because the printed sheet can be placed on the profile to better set the parameters of the machine that will perform the operation.
{{BR}}
[[File:stampacarrelli.png|200 px|thumb|Carts]]
'''Carts''' 
This function prints the arrangement of the carts with the related storage boxes for the cut leftovers, according to the setting defined in the dedicated section of the cutting settings.
{{BR}}
[[File:stampafasicommessa.png|200 px|thumb|Job batches]]
'''Job batches''' 
This function allows you to print the list of ''Job batches'' and the related typologies of the individual batches.

== Machining prints ==

'''Machinings''' 
This printout shows the list of machinings for the job profiles.

'''Workcenter profiles''' 
Similar to the previous one, this printout shows the profiles that will be machined on the work center, with the characteristics of the machinings that will be carried out.

'''Workcenter bars''' 
This printout shows the optimized bars processed in the work center.

'''Clamps position''' 
This is a printout related to the use of Timing + Machinings, where the clamping characteristics of the profiles and the position of the clamps on the work center are shown.

== Schedule prints==

'''Window Chart''' 
This printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the typology.

'''3D Window chart''' 
If the typology nodes are present, this printout, more suitable for commercial use, is used to obtain a detailed list of the dimensions and costs of the 3D typology.

'''Typology list''' 
This printout is very similar to the previous one, but without prices.

'''Delivery list''' 
This is a printout that describes the typologies without the window chart.

== Job prints ==

'''Transmittance scheme''' 
Prints the typology diagrams with thermal transmittance.

'''Bill of Materials''' 
This field allows you to obtain the order printout for the supplier. The contents and operation are the same as those explained for the [[File:tastodistinta.png]] button in the Materials window.

'''Job panes''' 
This is an order printout for the fillings of the window/door units in the quotation. It describes their dimensional characteristics and quantities.

'''Doc''' [[File:tastoc.png]] 
The associated button opens the Document selection window, where the document to be printed can be selected. Matching the selected document proposes a series of choices relating to currency, payment methods, and delivery times. This data will appear in the printed document.

== Full diagrams prints==

'''Full diagrams''' 
This printout shows the complete working list of the typology, with the diagram, cutting list, and list of accessories to be assembled.

'''Diagram and profiles''' 
Practically identical to the previous one, but without the list of accessories to be assembled.

'''Diagram accessories''' 
Unlike the previous one, this reproduces the typology diagram and the accessories to be assembled.

'''Only hardware var.''' 
This printout, intended for users of the advanced Timing + Machinings step, is used to indicate to the operator assigned to hardware assembly which elements have been selected by the program according to the dimensions. Only accessories coming from an auto-selection depending on the Lia and Hia variables will be included in this printout.

== Structure diagrams prints ==

'''Structure diagrams''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
In the case of separate structures, this printout shows the drawing of the individual window/door units with the notes entered in the Design Sheet.

'''Structures nodes and machinings''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
In the case of separate structures, this printout shows the drawing of the individual window/door units with the machinings and the notes entered in the Design Sheet.

'''Sashes''' ([[Opera Job Management#Version notes|Available from version 3.6]]) 
This printout allows you to obtain the dimensions of the sashes and the accessories entered in the [[Material lists management]].

'''Custom views''' 
This printout shows the enlarged detail using the Views function of the Design Sheet.

'''Nodes''' 
This printout reproduces the typology with the profile nodes. To obtain this printout, it is necessary to create a node archive.

'''Inscale sections''' ([[Opera Job Management#Version notes|Available from version 3.7]]) 
This printout reproduces all the typologies with the numeric reference of the node. To obtain this printout, it is necessary to create a node archive.

'''ID codes''' 
This printout shows the identification codes for assembling the profiles. It is used to correctly assemble the profiles on the typology, even by a less experienced worker. However, during the cutting phase, each piece must be marked with the identification code shown in the optimized cutting printout.

'''Typology cutting list''' 
This printout has the same contents as the one previously explained. The only difference is that this one refers to each individual typology in the job, while the other shows the overall cutting list for the whole job.

'''Diagram accessories, Typology panes, Shutter''' 
These printouts respectively show the list of accessories, panes, and shutters required for the whole job.

== Form data prints ==

'''Typology Form #1, #2, #3 / Scale type / Dimensions / Rows / Columns'''
Using these fields allows different print modes for the job typology form.

== Function buttons ==

The [[File:tastosetupstampe2.png]] button
This button opens the print setup window; for the contents and operation of this window, see the [[Technical print setup]] paragraph.

The [[File:tastotaglio.png]] button 
This button opens the cutting parameter setup window; for the contents and operation of this window, see the [[Cutting]] paragraph.

The [[File:tastodatimodulo.png]] button 
This button opens the module data management window and allows you to modify accessory data.


[[Category: JM/Manual]]

File:Quadroopzionidistampa.png

2026-06-09T15:31:19Z

Luca.cadeddu:

Printing Options

2026-06-09T15:28:39Z

Luca.cadeddu:

File:Finestrasetupstampetecniche.png

2026-06-09T15:20:35Z

Luca.cadeddu: uploaded a new version of "File:Finestrasetupstampetecniche.png"

File:Tastofiltristampe.png

2026-06-09T15:19:37Z

Luca.cadeddu:

File:Tastolistemateriale.png

2026-06-09T15:19:31Z

Luca.cadeddu:

File:Tastodettaglitecnici2.png

2026-06-09T15:19:24Z

Luca.cadeddu:

File:Tastorendering3d.png

2026-06-09T15:17:09Z

Luca.cadeddu:

File:Finestrasetupstampetecniche.png

2026-06-09T15:15:51Z

Luca.cadeddu: uploaded a new version of "File:Finestrasetupstampetecniche.png"

File:Fascicolomenù.png

2026-06-09T15:14:06Z

Luca.cadeddu:

File:Documentofascicolo.png

2026-06-09T15:09:50Z

Luca.cadeddu:

File:Formatonomefile.png

2026-06-09T15:08:44Z

Luca.cadeddu:

File:Fascicolo3.png

2026-06-09T15:07:32Z

Luca.cadeddu: uploaded a new version of "File:Fascicolo3.png"

Opera Job Management

2026-06-09T15:04:11Z

Luca.cadeddu: /* Opera JM 3.10 */

[[Image:OperaJM.jpg|300px|thumb|right]]
__TOC__

{{BR}}

==Introduction==
List of new features in the various versions of Opera Job Management

==Version notes==

{| border="1" style="border-collapse:collapse;float:right"
!''Legend:''
|-
|[[Image:add.png|16px]] = new feature
|-
|[[Image:fix.png|16px]] = bug fix
|-
|[[Image:upd.png|16px]] = update
|-
|[[Image:bug.png|16px]] = known bug
|}
{{BR}}

==='''Opera JM 3.10'''===

;Main features
:[[Image:add.png|16px]] [[How to manage the new Member Area|The new Member Area]]
:[[Image:upd.png|16px]] [[How to manage the extra colors|New fields in the color archive for managing extra colors]]
:[[Image:upd.png|16px]] [[Job profile management|New management of profile data in the order material table]]
:[[Image:upd.png|16px]] [[Job profile management#Section_4:_settings_for_adding_bars|New management of the quantity of material to be ordered]]
:[[Image:upd.png|16px]] [[Custom job prices|New entries for price management: series price and price per package]]
:[[Image:upd.png|16px]] [[Optimization parameters#Section_3_-_parameters_for_the_optimization_type|New features in profile optimization]]
:[[Image:add.png|16px]] [[Miscellaneous stock items archive|New menu item for managing generic warehouse items]]
:[[Image:upd.png|16px]] [[Stock_setup#Minimum_stock_management|New field for managing understock conditions in warehouse]]
:[[Image:add.png|16px]] [[Stock_setup#Leftover_management|New features for managing leftovers in the warehouse for each profile]]
:[[Image:add.png|16px]] [[Backup copies|New backup copies management]]

;More News and Improvements

:[[Image:upd.png|16px]] [[How to create a job report|New fields in the reports]]
:[[Image:upd.png|16px]] [[Technical sheets|New symbols for horizontal and vertical in technical prints]]
:[[Image:upd.png|16px]] [[Printing Options|New print document: Machinings]]
:[[Image:upd.png|16px]] [[Machinings|Print the reference in the profiles lists and labels]]
:[[Image:upd.png|16px]] [[Subject Informazion|Management of glazing bead in the node]]
:[[Image:upd.png|16px]] [[Workers archive|New fields in the manufacturing workers archive]]

==='''Opera JM 3.9'''===

;Main features
:[[Image:add.png|16px]] [[How to manage stepped glass|Stepped glass]]
:[[Image:add.png|16px]] [[Price Groups]]
:[[Image:add.png|16px]] [[How_to_create_a_new_profile#How to match accessories to the profile|Automatic accessories]]
:[[Image:add.png|16px]] [[Systems matching]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D|2D Optimization]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]
:[[Image:upd.png|16px]] [[Job reports management|Job reports management: drop down menu and save attachment]]
:[[Image:upd.png|16px]] [[How to create a new pane#How to Assign Prices|Pane color management]]
:[[Image:upd.png|16px]] [[How to create a new pane#Assembled pane|Assembled pane management]]
:[[Image:upd.png|16px]] [[How to change opening directions#Sliding and Lift and slide|Switch opening for sliding]]
:[[Image:upd.png|16px]] [[How to change opening directions#Typology_Mirror|Typology mirror]]
:[[Image:upd.png|16px]] [[Order category table management|Order categories]]
:[[Image:add.png|16px]] [[How to mamagement structure ID code|Structure ID]]

;More News and Improvements
:[[Image:add.png|16px]] [[Opera_Job_Management_user_guide#Section_9: Company|New menu Company]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New button '''Load default''' in Window chart print settings]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New field '''Print rule values''' in Window chart print settings]]
:[[Image:upd.png|16px]] [[Warehouse documents#Documents|New field Document sent]]
:[[Image:add.png|16px]] [[Systems#Contents description|Definition of the systems presentation order]]
:[[Image:upd.png|16px]] [[2D Optimization#Section 3: Fields for message handling and fill size|Glass size rounding]]


==='''Opera JM 3.8.6'''===
;Main features
:[[Image:add.png|16px]] [[New menu]] [[File:video.png]] [https://youtu.be/ySD-dH4N9hA| link al video]
:[[Image:add.png|16px]] [[Text styles]] [[File:video.png]] [https://youtu.be/m46AUNc0obM| link al video]
:[[Image:add.png|16px]] [[Codex sintax]] [[File:video.png]] [https://youtu.be/NOINwr-rlbc| link al video]
:[[Image:upd.png|16px]] [[Waste management]]
:[[Image:add.png|16px]] [[Management of unusable areas]]
:[[Image:add.png|16px]] [[Calculations: extra cost management]]

;More News and Improvements
:[[Image:upd.png|16px]] [[Labor time with machinings]]
:[[Image:add.png|16px]] [[Timing]]
:[[Image:upd.png|16px]] [[Notes on materials]]
:[[Image:upd.png|16px]] [[Quantities calculation in job lines]]
:[[Image:add.png|16px]] [[Job material data management | New function Disable in the job material data management]]
:[[Image:add.png|16px]] [[Optimization 2D|Message management for oversized panes]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]

{{BR}}

== Opera JM 3.8.5 ==
:[[Image:add.png|16px]] [[Headings|Headings restyling]]
:[[Image:add.png|16px]] [[How to manage document syntax | New document syntax]]
:[[Image:add.png|16px]] [[Rates management]]
:[[Image:upd.png|16px]] Improved filter Inventory Management
:[[Image:upd.png|16px]] Profile archive Restyling
:[[Image:add.png|16px]] [[How to manage the delivery date of the job and the order from the warehouse|Management of the delivery date of the order and of the warehouse order]]
:[[Image:add.png|16px]] [[Documents|Setting margins in documents]]

==='''Opera JM 3.8'''===

;Main features
:[[Image:add.png|16px]] [[How to run warehouse consolidation|Warehouse consolidation]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to group cutting IDs by job|Added feature to group job cuts by ID]]''' (3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage custom price color categories|Custom categories for price color]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Improved layout of job batches '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage cloud attachments in jobs|Cloud documents as Job attachments]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to import DXF icons with Drag-and-drop|New dxf import system]] '''(3.8.4 and above)'''

:[[Image:add.png|16px]] Project management ''(3.8.3 and above)''
:[[Image:add.png|16px]] Job Messages ''(3.8.3 and above)''
:[[Image:add.png|16px]] Unified control for job options ''(3.8.3 and above)''
:[[Image:add.png|16px]] Custom window chart in documents ''(3.8.3 and above)''

:[[Image:add.png|16px]] Cloud backups ''(3.8.2 and above)''
:[[Image:add.png|16px]] Advanced leftover management ''(3.8.2 and above)''
:[[Image:add.png|16px]] Project log ''(3.8.2 and above)''
:[[Image:add.png|16px]] Job status history ''(3.8.2 and above)''

:[[Image:add.png|16px]] Technical catalogs ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for wood profiles ''(3.8.1 and above)''

:[[Image:add.png|16px]] Warehouse management ''(3.8.0 and above)''

;More News and Improvements
:[[Image:add.png|16px]] [[Edit_Jobs|Quick search in jobs]] '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item previews in Parts dialog '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item preview in Pane dialog'''(3.8.4 and above)'''
:[[Image:add.png|16px]] Glass price can inglude an extra cost based on its perimeter '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[Come_gestire_le_revisioni_listino#Stampa_dei_listini|Added live grids printout]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Multiple percentages is margin rates '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Added restock quantity for items in warehouse '''(3.8.4 and above)'''

:[[Image:upd.png|16px]] Vertical notes ''(3.8.2 and above)''
:[[Image:add.png|16px]] Assembled profiles printout ''(3.8.2 and above)''
:[[Image:add.png|16px]] Added Selling discount class to price list''(3.8.2 and above)''

:[[Image:upd.png|16px]] Improved handling of DXF entities ''(3.8.3 and above)''
:[[Image:add.png|16px]] Check online users connected to the database ''(3.8.3 and above)''
''
:[[Image:add.png|16px]] New print format for job modules ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Keyword seach in warehouse ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for formulas in job lines ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added support for image transparency ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added feature to flip machinings ''(3.8.1 and above)''

Opera Job Management

2026-06-09T15:02:38Z

Luca.cadeddu: /* Opera JM 3.10 */

[[Image:OperaJM.jpg|300px|thumb|right]]
__TOC__

{{BR}}

==Introduction==
List of new features in the various versions of Opera Job Management

==Version notes==

{| border="1" style="border-collapse:collapse;float:right"
!''Legend:''
|-
|[[Image:add.png|16px]] = new feature
|-
|[[Image:fix.png|16px]] = bug fix
|-
|[[Image:upd.png|16px]] = update
|-
|[[Image:bug.png|16px]] = known bug
|}
{{BR}}

==='''Opera JM 3.10'''===

;Main features
:[[Image:add.png|16px]] [[How to manage the new Member Area|The new Member Area]]
:[[Image:upd.png|16px]] [[How to manage the extra colors|New fields in the color archive for managing extra colors]]
:[[Image:upd.png|16px]] [[Job profile management|New management of profile data in the order material table]]
:[[Image:upd.png|16px]] [[Job profile management#Section_4:_settings_for_adding_bars|New management of the quantity of material to be ordered]]
:[[Image:upd.png|16px]] [[Custom job prices|New entries for price management: series price and price per package]]
:[[Image:upd.png|16px]] [[Optimization parameters#Section_3_-_parameters_for_the_optimization_type|New features in profile optimization]]
:[[Image:add.png|16px]] [[Miscellaneous stock items archive|New menu item for managing generic warehouse items]]
:[[Image:upd.png|16px]] [[Stock_setup#Minimum_stock_management|New field for managing understock conditions in warehouse]]
:[[Image:add.png|16px]] [[Stock setup#Section_4:_leftovers_management|New features for managing leftovers in the warehouse for each profile]]
:[[Image:add.png|16px]] [[Backup copies|New backup copies management]]

;More News and Improvements

:[[Image:upd.png|16px]] [[How to create a job report|New fields in the reports]]
:[[Image:upd.png|16px]] [[Technical sheets|New symbols for horizontal and vertical in technical prints]]
:[[Image:upd.png|16px]] [[Printing Options|New print document: Machinings]]
:[[Image:upd.png|16px]] [[Machinings|Print the reference in the profiles lists and labels]]
:[[Image:upd.png|16px]] [[Subject Informazion|Management of glazing bead in the node]]
:[[Image:upd.png|16px]] [[Workers archive|New fields in the manufacturing workers archive]]

==='''Opera JM 3.9'''===

;Main features
:[[Image:add.png|16px]] [[How to manage stepped glass|Stepped glass]]
:[[Image:add.png|16px]] [[Price Groups]]
:[[Image:add.png|16px]] [[How_to_create_a_new_profile#How to match accessories to the profile|Automatic accessories]]
:[[Image:add.png|16px]] [[Systems matching]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D|2D Optimization]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]
:[[Image:upd.png|16px]] [[Job reports management|Job reports management: drop down menu and save attachment]]
:[[Image:upd.png|16px]] [[How to create a new pane#How to Assign Prices|Pane color management]]
:[[Image:upd.png|16px]] [[How to create a new pane#Assembled pane|Assembled pane management]]
:[[Image:upd.png|16px]] [[How to change opening directions#Sliding and Lift and slide|Switch opening for sliding]]
:[[Image:upd.png|16px]] [[How to change opening directions#Typology_Mirror|Typology mirror]]
:[[Image:upd.png|16px]] [[Order category table management|Order categories]]
:[[Image:add.png|16px]] [[How to mamagement structure ID code|Structure ID]]

;More News and Improvements
:[[Image:add.png|16px]] [[Opera_Job_Management_user_guide#Section_9: Company|New menu Company]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New button '''Load default''' in Window chart print settings]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New field '''Print rule values''' in Window chart print settings]]
:[[Image:upd.png|16px]] [[Warehouse documents#Documents|New field Document sent]]
:[[Image:add.png|16px]] [[Systems#Contents description|Definition of the systems presentation order]]
:[[Image:upd.png|16px]] [[2D Optimization#Section 3: Fields for message handling and fill size|Glass size rounding]]


==='''Opera JM 3.8.6'''===
;Main features
:[[Image:add.png|16px]] [[New menu]] [[File:video.png]] [https://youtu.be/ySD-dH4N9hA| link al video]
:[[Image:add.png|16px]] [[Text styles]] [[File:video.png]] [https://youtu.be/m46AUNc0obM| link al video]
:[[Image:add.png|16px]] [[Codex sintax]] [[File:video.png]] [https://youtu.be/NOINwr-rlbc| link al video]
:[[Image:upd.png|16px]] [[Waste management]]
:[[Image:add.png|16px]] [[Management of unusable areas]]
:[[Image:add.png|16px]] [[Calculations: extra cost management]]

;More News and Improvements
:[[Image:upd.png|16px]] [[Labor time with machinings]]
:[[Image:add.png|16px]] [[Timing]]
:[[Image:upd.png|16px]] [[Notes on materials]]
:[[Image:upd.png|16px]] [[Quantities calculation in job lines]]
:[[Image:add.png|16px]] [[Job material data management | New function Disable in the job material data management]]
:[[Image:add.png|16px]] [[Optimization 2D|Message management for oversized panes]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]

{{BR}}

== Opera JM 3.8.5 ==
:[[Image:add.png|16px]] [[Headings|Headings restyling]]
:[[Image:add.png|16px]] [[How to manage document syntax | New document syntax]]
:[[Image:add.png|16px]] [[Rates management]]
:[[Image:upd.png|16px]] Improved filter Inventory Management
:[[Image:upd.png|16px]] Profile archive Restyling
:[[Image:add.png|16px]] [[How to manage the delivery date of the job and the order from the warehouse|Management of the delivery date of the order and of the warehouse order]]
:[[Image:add.png|16px]] [[Documents|Setting margins in documents]]

==='''Opera JM 3.8'''===

;Main features
:[[Image:add.png|16px]] [[How to run warehouse consolidation|Warehouse consolidation]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to group cutting IDs by job|Added feature to group job cuts by ID]]''' (3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage custom price color categories|Custom categories for price color]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Improved layout of job batches '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage cloud attachments in jobs|Cloud documents as Job attachments]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to import DXF icons with Drag-and-drop|New dxf import system]] '''(3.8.4 and above)'''

:[[Image:add.png|16px]] Project management ''(3.8.3 and above)''
:[[Image:add.png|16px]] Job Messages ''(3.8.3 and above)''
:[[Image:add.png|16px]] Unified control for job options ''(3.8.3 and above)''
:[[Image:add.png|16px]] Custom window chart in documents ''(3.8.3 and above)''

:[[Image:add.png|16px]] Cloud backups ''(3.8.2 and above)''
:[[Image:add.png|16px]] Advanced leftover management ''(3.8.2 and above)''
:[[Image:add.png|16px]] Project log ''(3.8.2 and above)''
:[[Image:add.png|16px]] Job status history ''(3.8.2 and above)''

:[[Image:add.png|16px]] Technical catalogs ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for wood profiles ''(3.8.1 and above)''

:[[Image:add.png|16px]] Warehouse management ''(3.8.0 and above)''

;More News and Improvements
:[[Image:add.png|16px]] [[Edit_Jobs|Quick search in jobs]] '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item previews in Parts dialog '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item preview in Pane dialog'''(3.8.4 and above)'''
:[[Image:add.png|16px]] Glass price can inglude an extra cost based on its perimeter '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[Come_gestire_le_revisioni_listino#Stampa_dei_listini|Added live grids printout]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Multiple percentages is margin rates '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Added restock quantity for items in warehouse '''(3.8.4 and above)'''

:[[Image:upd.png|16px]] Vertical notes ''(3.8.2 and above)''
:[[Image:add.png|16px]] Assembled profiles printout ''(3.8.2 and above)''
:[[Image:add.png|16px]] Added Selling discount class to price list''(3.8.2 and above)''

:[[Image:upd.png|16px]] Improved handling of DXF entities ''(3.8.3 and above)''
:[[Image:add.png|16px]] Check online users connected to the database ''(3.8.3 and above)''
''
:[[Image:add.png|16px]] New print format for job modules ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Keyword seach in warehouse ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for formulas in job lines ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added support for image transparency ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added feature to flip machinings ''(3.8.1 and above)''

Opera Job Management

2026-06-09T14:59:08Z

Luca.cadeddu: /* Version notes */

[[Image:OperaJM.jpg|300px|thumb|right]]
__TOC__

{{BR}}

==Introduction==
List of new features in the various versions of Opera Job Management

==Version notes==

{| border="1" style="border-collapse:collapse;float:right"
!''Legend:''
|-
|[[Image:add.png|16px]] = new feature
|-
|[[Image:fix.png|16px]] = bug fix
|-
|[[Image:upd.png|16px]] = update
|-
|[[Image:bug.png|16px]] = known bug
|}
{{BR}}

==='''Opera JM 3.10'''===

;Main features
:[[Image:add.png|16px]] [[How to manage the new Member Area|The new Member Area]]
:[[Image:upd.png|16px]] [[How to manage the extra colors|New fields in the color archive for managing extra colors]]
:[[Image:upd.png|16px]] [[Job profile management|New management of profile data in the order material table]]
:[[Image:upd.png|16px]] [[Job profile management#Section_4:_settings_for_adding_bars|New management of the quantity of material to be ordered]]
:[[Image:upd.png|16px]] [[Custom job prices|New entries for price management: series price and price per package]]
:[[Image:upd.png|16px]] [[Optimization parameters#Section_3_-_parameters_for_the_optimization_type|New features in profile optimization]]
:[[Image:add.png|16px]] [[Miscellaneous stock items archive|New menu item for managing generic warehouse items]]
:[[Image:upd.png|16px]] [[Stock setup#Section_2:_understock management|New field for managing understock conditions in warehouse]]
:[[Image:add.png|16px]] [[Stock setup#Section_4:_leftovers_management|New features for managing leftovers in the warehouse for each profile]]
:[[Image:add.png|16px]] [[Backup copies|New backup copies management]]

;More News and Improvements

:[[Image:upd.png|16px]] [[How to create a job report|New fields in the reports]]
:[[Image:upd.png|16px]] [[Technical sheets|New symbols for horizontal and vertical in technical prints]]
:[[Image:upd.png|16px]] [[Printing Options|New print document: Machinings]]
:[[Image:upd.png|16px]] [[Machinings|Print the reference in the profiles lists and labels]]
:[[Image:upd.png|16px]] [[Subject Informazion|Management of glazing bead in the node]]
:[[Image:upd.png|16px]] [[Workers archive|New fields in the manufacturing workers archive]]

==='''Opera JM 3.9'''===

;Main features
:[[Image:add.png|16px]] [[How to manage stepped glass|Stepped glass]]
:[[Image:add.png|16px]] [[Price Groups]]
:[[Image:add.png|16px]] [[How_to_create_a_new_profile#How to match accessories to the profile|Automatic accessories]]
:[[Image:add.png|16px]] [[Systems matching]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D|2D Optimization]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]
:[[Image:upd.png|16px]] [[Job reports management|Job reports management: drop down menu and save attachment]]
:[[Image:upd.png|16px]] [[How to create a new pane#How to Assign Prices|Pane color management]]
:[[Image:upd.png|16px]] [[How to create a new pane#Assembled pane|Assembled pane management]]
:[[Image:upd.png|16px]] [[How to change opening directions#Sliding and Lift and slide|Switch opening for sliding]]
:[[Image:upd.png|16px]] [[How to change opening directions#Typology_Mirror|Typology mirror]]
:[[Image:upd.png|16px]] [[Order category table management|Order categories]]
:[[Image:add.png|16px]] [[How to mamagement structure ID code|Structure ID]]

;More News and Improvements
:[[Image:add.png|16px]] [[Opera_Job_Management_user_guide#Section_9: Company|New menu Company]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New button '''Load default''' in Window chart print settings]]
:[[Image:add.png|16px]] [[Window_chart_print_settings|New field '''Print rule values''' in Window chart print settings]]
:[[Image:upd.png|16px]] [[Warehouse documents#Documents|New field Document sent]]
:[[Image:add.png|16px]] [[Systems#Contents description|Definition of the systems presentation order]]
:[[Image:upd.png|16px]] [[2D Optimization#Section 3: Fields for message handling and fill size|Glass size rounding]]


==='''Opera JM 3.8.6'''===
;Main features
:[[Image:add.png|16px]] [[New menu]] [[File:video.png]] [https://youtu.be/ySD-dH4N9hA| link al video]
:[[Image:add.png|16px]] [[Text styles]] [[File:video.png]] [https://youtu.be/m46AUNc0obM| link al video]
:[[Image:add.png|16px]] [[Codex sintax]] [[File:video.png]] [https://youtu.be/NOINwr-rlbc| link al video]
:[[Image:upd.png|16px]] [[Waste management]]
:[[Image:add.png|16px]] [[Management of unusable areas]]
:[[Image:add.png|16px]] [[Calculations: extra cost management]]

;More News and Improvements
:[[Image:upd.png|16px]] [[Labor time with machinings]]
:[[Image:add.png|16px]] [[Timing]]
:[[Image:upd.png|16px]] [[Notes on materials]]
:[[Image:upd.png|16px]] [[Quantities calculation in job lines]]
:[[Image:add.png|16px]] [[Job material data management | New function Disable in the job material data management]]
:[[Image:add.png|16px]] [[Optimization 2D|Message management for oversized panes]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]

{{BR}}

== Opera JM 3.8.5 ==
:[[Image:add.png|16px]] [[Headings|Headings restyling]]
:[[Image:add.png|16px]] [[How to manage document syntax | New document syntax]]
:[[Image:add.png|16px]] [[Rates management]]
:[[Image:upd.png|16px]] Improved filter Inventory Management
:[[Image:upd.png|16px]] Profile archive Restyling
:[[Image:add.png|16px]] [[How to manage the delivery date of the job and the order from the warehouse|Management of the delivery date of the order and of the warehouse order]]
:[[Image:add.png|16px]] [[Documents|Setting margins in documents]]

==='''Opera JM 3.8'''===

;Main features
:[[Image:add.png|16px]] [[How to run warehouse consolidation|Warehouse consolidation]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to group cutting IDs by job|Added feature to group job cuts by ID]]''' (3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage custom price color categories|Custom categories for price color]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Improved layout of job batches '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage cloud attachments in jobs|Cloud documents as Job attachments]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to import DXF icons with Drag-and-drop|New dxf import system]] '''(3.8.4 and above)'''

:[[Image:add.png|16px]] Project management ''(3.8.3 and above)''
:[[Image:add.png|16px]] Job Messages ''(3.8.3 and above)''
:[[Image:add.png|16px]] Unified control for job options ''(3.8.3 and above)''
:[[Image:add.png|16px]] Custom window chart in documents ''(3.8.3 and above)''

:[[Image:add.png|16px]] Cloud backups ''(3.8.2 and above)''
:[[Image:add.png|16px]] Advanced leftover management ''(3.8.2 and above)''
:[[Image:add.png|16px]] Project log ''(3.8.2 and above)''
:[[Image:add.png|16px]] Job status history ''(3.8.2 and above)''

:[[Image:add.png|16px]] Technical catalogs ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for wood profiles ''(3.8.1 and above)''

:[[Image:add.png|16px]] Warehouse management ''(3.8.0 and above)''

;More News and Improvements
:[[Image:add.png|16px]] [[Edit_Jobs|Quick search in jobs]] '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item previews in Parts dialog '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item preview in Pane dialog'''(3.8.4 and above)'''
:[[Image:add.png|16px]] Glass price can inglude an extra cost based on its perimeter '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[Come_gestire_le_revisioni_listino#Stampa_dei_listini|Added live grids printout]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Multiple percentages is margin rates '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Added restock quantity for items in warehouse '''(3.8.4 and above)'''

:[[Image:upd.png|16px]] Vertical notes ''(3.8.2 and above)''
:[[Image:add.png|16px]] Assembled profiles printout ''(3.8.2 and above)''
:[[Image:add.png|16px]] Added Selling discount class to price list''(3.8.2 and above)''

:[[Image:upd.png|16px]] Improved handling of DXF entities ''(3.8.3 and above)''
:[[Image:add.png|16px]] Check online users connected to the database ''(3.8.3 and above)''
''
:[[Image:add.png|16px]] New print format for job modules ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Keyword seach in warehouse ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for formulas in job lines ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added support for image transparency ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added feature to flip machinings ''(3.8.1 and above)''

File:Buttonsendcommission.png

2025-04-07T16:04:52Z

Luca.cadeddu:

File:Tecnicomail.png

2025-04-07T16:03:43Z

Luca.cadeddu:

How to manage opening sides

2024-04-10T09:12:51Z

Luca.cadeddu: /* Typology mirror */

__TOC__
[[File:foglioprogettazionefasciacentrale.png|500 px|thumb]]

{{NB|To access this box in Opera Job Management: from the typologies archive, after selecting a typology press the button [[Image:tastoprogettazione.png]]}}

After creating the structure, press the button [[image:tastomanovra.png]]; its effect will be different depending on the number of doors of the structure present in the sheet

{{BR}}

==Structure with 1 door==
The muntins will be reversed, including accessories.

{|
|[[File:tip1antaprima.png|thumb|200px|Before pressing the button]]
|[[File:tip1antadopo.png|thumb|200px|After pressing the button. The door muntins were reversed including their accessories.]]
|}

==Structure with 2 doors==
all the profiles of the central node, including the accessories, will be reversed.

{|
|[[File:tip2antaprima.png|thumb|200px|Before pressing the button]]
|[[File:tip2antadopo.png|thumb|200px|After pressing the button. All the profiles of the central node were reversed including their accessories.]]
|}

== Structure with 3 doors==
[[File:messaggiomanovraante.png|500 px|thumb|right]]
The request on the side will be showed:

* Choosing [[File:tastonodo.png]], the program will switch all node profiles related to the handle, including their accessories.

{|
|[[File:tip3nodoprima.png|thumb|200px|Before pressing the button.]]
|[[File:tip3nododopo.png|thumb|200px|After pressing the button. All the profiles of the central node related to the handle have been reversed including their accessories. ]]
|}

* Choosing instead [[File:manovraante.png]], the program will switch the position of the semi-fixed doors and will put the opening door on the opposite side.

{|
|[[File:tip3anteprima.png|thumb|200px|Before pressing the button.]]
|[[File:tip3antedopo.png|thumb|200px|After pressing the button. The position of the half-fixed doors was switched, the opening door was moved to the opposite side from the original position.]]
|}

* Choosing [[File:manovragira.png]], the program will reverse the opening direction only of the door where there is a handle.

== Sliding Structure and Lift – and – Slide Structure ==

The maneuvering function in case of sliding or lifting-sliding structures acts in a more complex way by going to reverse several parameters:

* Side frameworks are reversed, so all components in the left side will be moved to the right side and vice versa
* Doors, will be switched and reversed.
* The central node will be mirrored and reversed
* The rails will be reversed by bringing the door that was in the inner rail, to the outer rail and vice versa.

{|
|[[File:tipscorprima.png|thumb|200px|Before pressing the button.]]
|[[File:tipscordopo.png|thumb|200px|After pressing the button. The structure is completely mirrored and the rails reversed.]]
|}

== Typology mirror ==
[[File:funzionespecchiatipologia.png|thumb|right|500px|]]
Selecting more than one structure will now mirror the typology.
You have to click on button [[image:tastomanovra.png]] and then choosing the structure with the mouse.

{|
|[[File:specchiatipologiaprima.png|thumb|200px|A picture showing the typology before mirroring.]]
|[[File:specchiatipologiadopo.png|thumb|200px|A picture showing the typology after mirroring.]]
|}

How to manage opening sides

2024-04-10T09:05:48Z

Luca.cadeddu:

__TOC__
[[File:foglioprogettazionefasciacentrale.png|500 px|thumb]]

{{NB|To access this box in Opera Job Management: from the typologies archive, after selecting a typology press the button [[Image:tastoprogettazione.png]]}}

After creating the structure, press the button [[image:tastomanovra.png]]; its effect will be different depending on the number of doors of the structure present in the sheet

{{BR}}

==Structure with 1 door==
The muntins will be reversed, including accessories.

{|
|[[File:tip1antaprima.png|thumb|200px|Before pressing the button]]
|[[File:tip1antadopo.png|thumb|200px|After pressing the button. The door muntins were reversed including their accessories.]]
|}

==Structure with 2 doors==
all the profiles of the central node, including the accessories, will be reversed.

{|
|[[File:tip2antaprima.png|thumb|200px|Before pressing the button]]
|[[File:tip2antadopo.png|thumb|200px|After pressing the button. All the profiles of the central node were reversed including their accessories.]]
|}

== Structure with 3 doors==
[[File:messaggiomanovraante.png|500 px|thumb|right]]
The request on the side will be showed:

* Choosing [[File:tastonodo.png]], the program will switch all node profiles related to the handle, including their accessories.

{|
|[[File:tip3nodoprima.png|thumb|200px|Before pressing the button.]]
|[[File:tip3nododopo.png|thumb|200px|After pressing the button. All the profiles of the central node related to the handle have been reversed including their accessories. ]]
|}

* Choosing instead [[File:manovraante.png]], the program will switch the position of the semi-fixed doors and will put the opening door on the opposite side.

{|
|[[File:tip3anteprima.png|thumb|200px|Before pressing the button.]]
|[[File:tip3antedopo.png|thumb|200px|After pressing the button. The position of the half-fixed doors was switched, the opening door was moved to the opposite side from the original position.]]
|}

* Choosing [[File:manovragira.png]], the program will reverse the opening direction only of the door where there is a handle.

== Sliding Structure and Lift – and – Slide Structure ==

The maneuvering function in case of sliding or lifting-sliding structures acts in a more complex way by going to reverse several parameters:

* Side frameworks are reversed, so all components in the left side will be moved to the right side and vice versa
* Doors, will be switched and reversed.
* The central node will be mirrored and reversed
* The rails will be reversed by bringing the door that was in the inner rail, to the outer rail and vice versa.

{|
|[[File:tipscorprima.png|thumb|200px|Before pressing the button.]]
|[[File:tipscordopo.png|thumb|200px|After pressing the button. The structure is completely mirrored and the rails reversed.]]
|}

== Typology mirror ==
[[File:funzionespecchiatipologia.png|thumb|right|500px|]]
Selezionando più di una struttura è possibile specchiare la tipologia.
Attivando la funzione manovra con il tasto [[image:tastomanovra.png]], selezionare con il mouse tutta la struttura.

{|
|[[File:specchiatipologiaprima.png|thumb|200px|Prima della funzione specchia.]]
|[[File:specchiatipologiadopo.png|thumb|200px|Dopo la funzione specchia. La struttura viene completamente specchiata.]]
|}

File:Funzionespecchiatipologia.png

2024-04-10T09:05:33Z

Luca.cadeddu:

File:Specchiatipologiadopo.png

2024-04-10T09:05:24Z

Luca.cadeddu:

File:Specchiatipologiaprima.png

2024-04-10T09:05:18Z

Luca.cadeddu:

Opera Job Management

2024-03-07T17:16:45Z

Luca.cadeddu: /* Opera JM 3.9 */

[[Image:OperaJM.jpg|300px|thumb|right]]
__TOC__

{{BR}}

==Introduction==
{{WIP}}
{{BR}}

==Version notes==

{| border="1" style="border-collapse:collapse;float:right"
!''Legend:''
|-
|[[Image:add.png|16px]] = new feature
|-
|[[Image:fix.png|16px]] = bug fix
|-
|[[Image:upd.png|16px]] = update
|-
|[[Image:bug.png|16px]] = known bug
|}
{{BR}}



==='''Opera JM 3.8.6'''===
;Main features
:[[Image:add.png|16px]] [[New menu]] [[File:video.png]] [https://youtu.be/ySD-dH4N9hA| link al video]
:[[Image:add.png|16px]] [[Text styles]] [[File:video.png]] [https://youtu.be/m46AUNc0obM| link al video]
:[[Image:add.png|16px]] [[Codex sintax]] [[File:video.png]] [https://youtu.be/NOINwr-rlbc| link al video]
:[[Image:upd.png|16px]] [[Waste management]]
:[[Image:add.png|16px]] [[Management of unusable areas]]
:[[Image:add.png|16px]] [[Calculations: extra cost management]]

;Minor updates
:[[Image:upd.png|16px]] [[Labor time with machinings]]
:[[Image:add.png|16px]] [[Timing]]
:[[Image:upd.png|16px]] [[Notes on materials]]
:[[Image:upd.png|16px]] [[Quantities calculation in job lines]]
:[[Image:add.png|16px]] [[Job material data management | New function Disable in the job material data management]]
:[[Image:add.png|16px]] [[Optimization 2D|Message management for oversized panes]]
:[[Image:add.png|16px]] [[How to manage Optimization 2D]] [[File:video.png]] [https://youtu.be/wI47P7w9HZo| link al video]

{{BR}}

== Opera JM 3.8.5 ==
:[[Image:add.png|16px]] [[Headings|Headings restyling]]
:[[Image:add.png|16px]] [[How to manage document syntax | New document syntax]]
:[[Image:add.png|16px]] [[Rates management]]
:[[Image:upd.png|16px]] Improved filter Inventory Management
:[[Image:upd.png|16px]] Profile archive Restyling
:[[Image:add.png|16px]] [[How to manage the delivery date of the job and the order from the warehouse|Management of the delivery date of the order and of the warehouse order]]
:[[Image:add.png|16px]] [[Documents|Setting margins in documents]]

==='''Opera JM 3.8'''===

;Main features
:[[Image:add.png|16px]] [[How to run warehouse consolidation|Warehouse consolidation]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to group cutting IDs by job|Added feature to group job cuts by ID]]''' (3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage custom price color categories|Custom categories for price color]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Improved layout of job batches '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to manage cloud attachments in jobs|Cloud documents as Job attachments]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[How to import DXF icons with Drag-and-drop|New dxf import system]] '''(3.8.4 and above)'''

:[[Image:add.png|16px]] Project management ''(3.8.3 and above)''
:[[Image:add.png|16px]] Job Messages ''(3.8.3 and above)''
:[[Image:add.png|16px]] Unified control for job options ''(3.8.3 and above)''
:[[Image:add.png|16px]] Custom window chart in documents ''(3.8.3 and above)''

:[[Image:add.png|16px]] Cloud backups ''(3.8.2 and above)''
:[[Image:add.png|16px]] Advanced leftover management ''(3.8.2 and above)''
:[[Image:add.png|16px]] Project log ''(3.8.2 and above)''
:[[Image:add.png|16px]] Job status history ''(3.8.2 and above)''

:[[Image:add.png|16px]] Technical catalogs ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for wood profiles ''(3.8.1 and above)''

:[[Image:add.png|16px]] Warehouse management ''(3.8.0 and above)''

;Minor updates
:[[Image:add.png|16px]] [[Edit_Jobs|Quick search in jobs]] '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item previews in Parts dialog '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Item preview in Pane dialog'''(3.8.4 and above)'''
:[[Image:add.png|16px]] Glass price can inglude an extra cost based on its perimeter '''(3.8.4 and above)'''
:[[Image:add.png|16px]] [[Come_gestire_le_revisioni_listino#Stampa_dei_listini|Added live grids printout]] '''(3.8.4 and above)'''
:[[Image:add.png|16px]] Multiple percentages is margin rates '''(3.8.4 and above)'''
:[[Image:upd.png|16px]] Added restock quantity for items in warehouse '''(3.8.4 and above)'''

:[[Image:upd.png|16px]] Vertical notes ''(3.8.2 and above)''
:[[Image:add.png|16px]] Assembled profiles printout ''(3.8.2 and above)''
:[[Image:add.png|16px]] Added Selling discount class to price list''(3.8.2 and above)''

:[[Image:upd.png|16px]] Improved handling of DXF entities ''(3.8.3 and above)''
:[[Image:add.png|16px]] Check online users connected to the database ''(3.8.3 and above)''
''
:[[Image:add.png|16px]] New print format for job modules ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Keyword seach in warehouse ''(3.8.1 and above)''
:[[Image:add.png|16px]] Added support for formulas in job lines ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added support for image transparency ''(3.8.1 and above)''
:[[Image:upd.png|16px]] Added feature to flip machinings ''(3.8.1 and above)''

Accessory machinings

2023-08-03T08:16:35Z

Luca.cadeddu:

[[File:finestralavorazioniaccesorio.png|500 px|thumb|right]]
{{NB|o access this window: from ''Accessories'' press button[[Image:tastolavorazioni.png]]}}

'''Content description''':

*'''Name''' [[File:tastoc.png]]: the machining to assign to the profile
*'''Autom''':a set of automatic operations that Opera can manage to choose from. The machining cost will be automatically calculated.
**''None'': there is no specific condition to use the item, so the software will use it in any case. Please note that also setting a variable can affect whethere the accessory is applied or not
**''Connection bar contact'': this is used when the machining is related to the lock contacts where the connection bar insert when the casement is closed. this machining is usually linked to the Connection bar hardware
**''3RD closure contact'': an additional contact is usually mounted on the sash side where the lock is, usually for security locks. The machining is usually linked to the sash, and instructs the software that the sash profile next to the lock should contain a 3rd closure. Using formula you can setup the right condition for the exact position of the machining
**''Bearing plate'': the machining using this automation is linked to the lock hardware, and is used to setup a machining for the bearing plate located in front of the sash profile (can be either a mullion or a frame).
**''Contact'': this is used to setup machining for keepers related to the lock. The machining will be executed to the profile located in front of the lock. Each keeper involved will require a new machinining with "contact" automation and a set of rules/variables for the right positioning along the profile
**''Mullion Hole'': this automation is linked to the mullion support hardware. the machining is executed on the sash profile where the mullion is connected to
**''Band lock'': this is used only on band lock hardware, the machining is executed on the profile containing the lock
**''Push Handle'': push handle requires holes on both vertical sash profiles, this automation indicates the position of the two holes according to the lock position.
**''Opposite profile'': this is a general automation used on hardware which require a machining on the opposite profile the one containing the hardware itself
**''Hardware screw'': this is used for hardware screws, usually associated with conditions on height and width of the sash with variables Hia and Lia
**''Shutter hinge'': this is used for shutters requiring machining both on vertical and horizontal sash profile
**''Shutter hinge 3rd sash'': same as above but specific for 3rd sash on shutters
**''Hardware trimming'': machining to calculate the measure to cut the hardware accessory
**''Hardware striker slot'': this is used for machining of hardware installed on striker slot, machining must be added multiple times with condition and rules for a correct positioning according to the height of the items
**''Opposite profile (opposite ref.)'': same as opposite profile, but the reference point of the machining will be referred to the receiving profile
**''Gasket cut'': automation related to machining for gasket cut
**''Secondary hardware screws'': this automation is used to manage machining for corners of perimetral hardware. This only work for hardware items having position Head/R or Sill/L

*'''Desc''': the machining description.
* '''Offset''': the machining offset. (set positive values for bottom/right offset and negative for top/left offsets)
*'''Cond.''' [[File:frecciagiu.png]]: athe condition to be set for performing the operations
*'''Frame profile''': if enabled, the machining will be put within the frame
*'''All through''': if enabled, the machining will be added to the profiles on the same side
*'''Structure all through''': if enabled, the machining will be added to the profiles on the same side and to the structure beside
*'''Position ''' [[File:frecciagiu.png]]: the machining posizion (left = left side of the profile, right = right side of profile, none = central machining)
*'''From the right''': the machining position is drawn from the right compensating possible cutting errors
*'''Profile component type''' [[File:frecciagiu.png]]: sets the profile to which assign the machining when the selected profile is an assembled one.


[[Category: JM/Manual]]

File:UtilitadipianificazioneWindowsNuovaOperazione .png

2022-07-05T13:59:06Z

Luca.cadeddu:

File:UtilitadipianificazioneWindows .png

2022-07-05T13:56:18Z

Luca.cadeddu:

File:Tastox.png

2022-07-05T13:52:48Z

Luca.cadeddu: uploaded a new version of "File:Tastox.png"

File:TastoRegistroTimingCommessa.png

2022-07-05T13:52:17Z

Luca.cadeddu:

File:TastoCancTimingCommessa.png

2022-07-05T13:51:47Z

Luca.cadeddu:

File:TastoSincTimingCommessa.png

2022-07-05T13:51:14Z

Luca.cadeddu:

File:TastoDettaglioTimingCommessa.png

2022-07-05T13:50:42Z

Luca.cadeddu:

File:Quadrotimingcommessa .png

2022-07-05T13:48:31Z

Luca.cadeddu: uploaded a new version of "File:Quadrotimingcommessa .png"

File:Quadrotimingcommessa .png

2022-07-05T13:45:00Z

Luca.cadeddu:

How to set QR Code

2020-06-05T08:28:44Z

Luca.cadeddu:

A QR Code is a two-dimensional bar code (or 2D code), that is, a matrix, composed of black modules arranged inside a square-shaped scheme.
It is used to store information generally intended to be read via a mobile phone or smartphone.

In Opera Job Order Management, the QR code is used on CE labels and packaging labels:

<gallery>
Image:etichettaCE_vert_QR-CODE.png|Vertical CE label
Image:etichettaCE_oriz_QR-CODE.png|Horizontal CE label
Image:Imballaggio-10x10.png|Packaging label
</gallery>

[[Image:jm-QR-setup.png|border|thumb|400px|Example of QR Code setting]]
==Settings in JM==
To set the QR-CODE from the label archive, go to the "Label Fields" section and enter (or modify if it already exists) the "Piece barcode" field, setting the parameters as shown in the figure

In the "Text" field we can insert macros:

* ''E-MAIL:'' to send an e-mail insert:
** '''mailto:''' e-mail address,
** '''subject=''' subject of the e-mail,
** '''body=''' body of the e-mail ,
** example: <nowiki>''mailto:info@operacompany.com?subject=Typology information&body=Job:[PPPP] Typ:[WWWW] Year:[YYYY]''</nowiki>;
* ''SMS'': to send a text messagge:
** '''sms:''', the command to send an SMS is activated;
** example: <nowiki>''sms:399123456789?body=Job:[PPPP] Typ:[WWWW] Year:[YYYY]''</nowiki>;
* ''Web site:'' to connect to a website for demonstration purposes:
** '''http:''' complete address
** example: <nowiki>"http://www.operacompany.com"</nowiki>.
{{BR}}
* ''Barcode'': in this field we can choose the quality of the QR-CODE. The QR-CODE becomes less readable depending on the amount of information that is printed:
[[Image:tipo-QRcode.png|left|thumb|400px]]
* QR code (L): low quality (low)
* QR code (M): medium quality (medium)
* QR code (Q): high quality (quality)
* QR code (H): very high quality (hight)
* Micro QR code V2(L): type of coding not yet accepted by the international standard
* Micro QR code V2(M): type of coding not yet accepted by the international standard
* Micro QR code V4(L): type of coding not yet accepted by the international standard
* Micro QR code V4(M): type of coding not yet accepted by the international standard

{{BR}}

[[Category:JM/Manuale]]

File:Tipo-QRcode.png

2020-06-05T08:28:21Z

Luca.cadeddu:

File:Imballaggio-10x10.png

2020-06-05T08:26:58Z

Luca.cadeddu:

File:EtichettaCE oriz QR-CODE.png

2020-06-05T08:26:50Z

Luca.cadeddu:

File:EtichettaCE vert QR-CODE.png

2020-06-05T08:26:41Z

Luca.cadeddu:

File:Jm-QR-setup.png

2020-06-05T08:22:12Z

Luca.cadeddu:

How to set QR Code

2020-06-05T08:17:33Z

Luca.cadeddu: Created page with 'A QR Code is a two-dimensional bar code (or 2D code), that is, a matrix, composed of black modules arranged inside a square-shaped scheme. It is used to store information general…'