Series certification management

From Opera Wiki

Revision as of 10:17, 30 July 2026 by Monica.Sanna (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Note N.B: To access this window in Opera Job Management: from the Archives menu, select the Systems button, then Series, and then the File:uf.png button.


Management of series certifications


  • Type File:tastomenutendina.png: from the associated menu, it is possible to choose the profile system type.
  • Uf type File:tastomenutendina.png: from the associated menu, it is possible to choose the profile classification according to the UNI EN ISO 10077-1:2018 standard.
  • Uf: indicates the thermal transmittance value, when required by the selected configuration.
  • % frame surface File:tastomenutendina.png: from the associated menu, it is possible to choose the surface ratio between the frame of the window/door and the entire frame.
  • ITT Series File:tastomenutendina.png: from the associated menu, it is possible to choose the certifications associated with another series.
  • The File:tastoITT.png button opens the series certification management window. For its use, see the Certifications archive chapter of this manual.
Retrieved from "http://wiki.operacompany.com/en/index.php/Series_certification_management"