Standard accessories

From Opera Wiki

The profile default accessories window

N.B: To access this window in Opera Job Management: from the Archives menu, select the Profiles button and, in the next window, press the button.

In this window it is possible to associate a profile with its default accessories. By default accessories, we mean the accessories that are normally mounted on the profile. If a profile has a usual set of accessories, when it is assigned to a typology, its entire set of accessories is also assigned automatically. It is also possible to choose which ones to mount and which ones not to mount.

The main fields of this window are described below:

Accessory

Shows the accessory code, loaded from the selection opened by the associated button.

Qty pc

This is the quantity to be considered.

Automatic

Indicates to the program that the quantity must be determined automatically according to the quantity determination table set on the accessory in the Accessories Archive. For the automatic quantity determination table, see Appendix II: Explanation of technical data of accessories according to uses.

Position

The parameter chosen from the list determines the position of the accessory in the profile.

Autoinsert

Shows the accessory assignment mode. The following items can be selected:

• None: by setting this item, the program will not automatically assign the accessory. If you want to assign it, you must open the accessory assignment window and select it from the list, which in this case will show the list of the profile default accessories.

• Automatic request: setting this item requires the user to confirm the insertion.

• Selection: setting this mode opens the profile default accessories window, allowing only the desired accessories to be selected.

• Corner: allows the corner associated with the profile to be kept.

• Corner for slanted: allows the corner associated with the slanted profile to be kept.

• Floor accessories: allows the automatic insertion of accessories associated with the floor. Choosing this item enables the Floor type field.

• Automatic request for vertical: setting this item requires the user to confirm the insertion.

• Automatic request for horizontal: setting this item requires the user to confirm the insertion.

• Automatic: setting this mode allows the accessory to be assigned automatically.

• Automatic verticals: setting this mode allows the accessory to be assigned automatically.

• Automatic horizontals: setting this mode allows the accessory to be assigned automatically.

N.B:

• Automatic accessory insertion is also active for profiles entered in the MTI window.
• Accessories entered manually are deleted if they are also inserted automatically in the profile.

Related items

• How to associate accessories with a profile