Accessory machinings

From Opera Wiki

(Difference between revisions)
Jump to: navigation, search
Line 12: Line 12:
*'''All through''': if enabled, the machining will be added to the profiles on the same side
*'''All through''': if enabled, the machining will be added to the profiles on the same side
*'''Structure all through''':  if enabled, the machining will be added to the profiles on the same side and to the structure beside
*'''Structure all through''':  if enabled, the machining will be added to the profiles on the same side and to the structure beside
-
*'''Positione ''' [[File:frecciagiu.png]]: Determina la posizione della lavorazione nel profilo (Nessuna /Sinistra / Destra).
+
*'''Position ''' [[File:frecciagiu.png]]: the machining posizion (left = left side of the profile, right = right side of profile, none = central machining)  
-
 
+
*'''From the right''': the machining position is drawn from the right compensating possible cutting errors
-
*'''Da destra''': La posizione della lavorazione viene presa da destra compensando eventuali errori di taglio.
+
*'''Profile component type''' [[File:frecciagiu.png]]: sets the profile to which assign the machining when the selected profile is an assembled one.  
-
 
+
-
*'''Tipo componente profilo''' [[File:frecciagiu.png]]: Nel caso di un profilo composto, questa funzione consente di determinare su quale componete applicare la lavorazione. Se, ad esempio, si tratta di profili in Alluminio legno composti da un componente interno ed uno esterno.
+
-
 
+
<!-- HELP: JM/W2368-->
<!-- HELP: JM/W2368-->
[[Category: JM/Manual]]
[[Category: JM/Manual]]

Revision as of 10:12, 19 May 2011

Note N.B: o access this window: from Accessories press buttonImage:tastolavorazioni.png

Content description:

  • NameFile:Codice.png: the machining to assign to the profile
  • Autom:a set of automatic operations that Opera can manage to choose from. The machining cost will be automatically calculated.
  • Desc: the machining description.
  • Offset: the machining offset. (set positive values for bottom/right offset and negative for top/left offsets)
  • Cond. File:frecciagiu.png: athe condition to be set for performing the operations
  • Frame profile: if enabled, the machining will be put within the frame
  • All through: if enabled, the machining will be added to the profiles on the same side
  • Structure all through: if enabled, the machining will be added to the profiles on the same side and to the structure beside
  • Position File:frecciagiu.png: the machining posizion (left = left side of the profile, right = right side of profile, none = central machining)
  • From the right: the machining position is drawn from the right compensating possible cutting errors
  • Profile component type File:frecciagiu.png: sets the profile to which assign the machining when the selected profile is an assembled one.
Personal tools