How to manage stepped glass
From Opera Wiki
(Redirected from How to manage offset glass)
Contents |
N.B: To access this panel in Opera Job Management: select the 
button from the General info – type window or click on the typology's mirror in the Worksheet and select the 
button.
N.B: Offset glass management is active for double-glazing type panes and allows to calculate the cost of glass per sq. m. on the frame area, to show in the panes order list the offset sheet and its offset, and to provide a proper graphic of the node.
Offset glass creation
- Enter in the fields sup/inf/sx/dx the gap filling. The gap should be calculated considering the maximum area of the frame to be overlaid and according to the specifications indicated for the structures.
- Enter the obtained measure in the fields and then select the select the button
.
- The Offset Glass panel will open, where we will indicate the offset of the sheet should not cover the frame surface.
- When this operation is completed, the result will be shown in the same panel.
- Inside
- Outside
N.B: To display the image correctly in both documents and node, use in icon management the entities step
The node
In the Panes management section, a filling gap of -47 has been applied to obtain the maximum surface that overhangs the profile.
In the Step Glass Offset section, the offset is -52, which corresponds to the overlap of the inner sheet.
Display in the Job Pane list
